Bahasa Inggris
Bahasa Jerman
Bahasa Arab
Bahasa Perancis: Bahasa Perancis
Bahasa IndonesiaSaat ini
Bahasa Jepang
Bahasa Korea
Bahasa Melayu
Bahasa Portugis
Bahasa Rusia
Bahasa Spanyol
Bahasa Thailand
Bahasa Turki
Bahasa Vietnam
Sistem Utilitas Cleanroom
Sistem Clean-in - Place
A three-tank automated cleaning skid that prepares, heats, circulates and recovers rinse and detergent solutions through hygienic process equipment.
- Automated recipe-controlled cleaning
- Three segregated solution tanks
- Heated sanitary circulation loop
Perkenalan produk
The clean-in-place system stores rinse water and detergent solutions in dedicated stainless tanks, heats the selected medium through a plate heat exchanger and circulates it through connected process equipment without disassembly. Return temperature, conductivity and flow signals support phase changeover and repeatable recovery or drain decisions.
Fitur utama:
Sanitary centrifugal circulation pump
Plate heat exchanger heating
Automated valve manifold
Temperature and conductivity monitoring
Recipe-based sequencing
Detergent recovery routing
Integrated HMI control
Kekhawatiran produk pelanggan
Effective CIP depends on sufficient turbulence, correct detergent concentration, controlled temperature, complete surface wetting and reliable phase separation.
Low return velocity leaves product residueSize the circulation pump and return path for turbulent cleaning flow at the connected equipment.
Detergent strength varies between cyclesUse conductivity feedback and controlled water or concentrate make-up.
Cleaning phases mix and waste utilitiesApply return conductivity and temperature logic to route each phase to recovery or drain.
Cold solution cleans slowlyHeat the circulating medium through a sanitary plate heat exchanger with regulated utility flow.
Aplikasi yang Tipis
Bioreactor and vessel cleaningHygienic process pipingFilling and transfer equipmentPlate heat exchangersFood and beverage process lines
Parameter teknis
Tank volume, pump duty, heater area, number of circuits and automation are selected for connected equipment and cleaning recipes.
| Bahan inti | 316L stainless steel solution tanks and hygienic product-contact piping |
|---|---|
| Ketebalan Panel (Panel Thickness) | Tank wall typically 2.0–5.0 mm |
| Efektif lebar | Skid width typically 1500–3500 mm |
| Panjang maksimum | Complete skid length typically up to 6000 mm |
| Baja menghadap ketebalan | Control enclosure and skid sheet typically 1.5–3.0 mm |
| Kepadatan inti (core density) | 316L stainless steel kepadatan sekitar 8000 kg / m3 |
| Konduktivitas Termal (Thermal Conductivity) | 316L stainless steel sekitar 15 W / (m · K) pada suhu ambien |
| Permukaan selesai | Polished tank and piping interiors with satin external stainless finish |
| Jenis Bersama | Orbital-welded sanitary piping with clamp-connected valves, instruments and plate heat exchanger |
| Customization (Kustomisasi) | Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi. |
Pilihan yang tersedia
One to five solution tanksSingle or multiple cleaning circuitsElectric or steam heatingDetergent dosingConductivity analyzerReturn recovery moduleRemote recipe management
Planning a Clean-in-Place System specification?
Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.
