Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Controle de sala limpa e sistemas de monitoramento ambiental
Sensor de dióxido de carbono
A wall-mounted NDIR sensor that measures carbon dioxide concentration for occupancy-related ventilation and cleanroom environmental trending.
- NDIR CO₂ Measurement
- Long-Term Optical Stability
- Ventilation Demand Signal
- Selectable 0-10 V, 4-20 mA or Fieldbus Output
Introdução do produto
The carbon dioxide sensor uses non-dispersive infrared absorption to measure CO₂ without consuming a reactive sensing material. Room air diffuses through protected openings into the optical chamber, where wavelength-selective measurement separates carbon dioxide absorption from the reference signal. Temperature compensation and baseline-management options support stable indoor operation. Selectable voltage, current or network outputs let ventilation controls, environmental monitoring and room displays use the same measured concentration.
Características-chave
A dual-channel or reference-compensated design reduces long-term light-source drift.
Ventilated wall housing samples occupied-zone air while protecting the optical chamber.
Configurable analog and network outputs support both HVAC control and monitoring.
Preocupações do produto do cliente
CO₂ measurements are most useful when the sensor sees representative room air and its baseline behavior matches the occupancy pattern.
A sensor near a door or supply diffuser responds to transient air instead of the occupied zone.A stable wall location away from direct drafts provides a more representative room sample.
Automatic baseline correction is unsuitable for continuously occupied spaces.Selectable baseline strategy allows fixed or manually referenced calibration where CO₂ never falls to outdoor levels.
Dust or cleaning spray enters the optical path.Protected diffusion vents and an easy-wipe enclosure reduce direct contamination.
Ventilation controls and monitoring use separate sensors that disagree.Multiple outputs distribute one measured value to both systems.
Aplicações típicas
Occupied cleanroom ventilationLaboratory room monitoringControlled production suitesClean corridors and support areas
Parâmetros técnicos
Typical materials and dimensions for a wall-mounted NDIR carbon dioxide sensor are listed below.
| Material principal | NDIR optical chamber with infrared source and detector in flame-retardant polycarbonate housing |
|---|---|
| Painel de espessura | 30-50 mm sensor depth |
| Largura efetiva | 90-130 mm housing width |
| Comprimento máximo | Up to 150 mm housing height |
| Aço enfrentando espessura | 0 mm; non-metallic wall enclosure |
| Densidade Core | 1180-1220 kg/m³ for polycarbonate housing material |
| Condutividade térmica | 0.19-0.22 W/(m·K) for polycarbonate enclosure |
| Superfície acabado | Smooth white housing with black display window and green status indicator |
| Tipo conjunto | Rear wall-mount base with protected diffusion vents and pluggable signal terminal |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Display or blank faceVoltage or 4-20 mA outputModbus or BACnet communicationSelectable baseline correction
Planning a Carbon Dioxide Sensor specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
