English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Системы контроля за чистыми помещениями и экологического мониторинга
Датчик углекислого газа
A wall-mounted NDIR sensor that measures carbon dioxide concentration for occupancy-related ventilation and cleanroom environmental trending.
- NDIR CO₂ Measurement
- Long-Term Optical Stability
- Ventilation Demand Signal
- Selectable 0-10 V, 4-20 mA or Fieldbus Output
Введение продукции
The carbon dioxide sensor uses non-dispersive infrared absorption to measure CO₂ without consuming a reactive sensing material. Room air diffuses through protected openings into the optical chamber, where wavelength-selective measurement separates carbon dioxide absorption from the reference signal. Temperature compensation and baseline-management options support stable indoor operation. Selectable voltage, current or network outputs let ventilation controls, environmental monitoring and room displays use the same measured concentration.
Основные характеристики
A dual-channel or reference-compensated design reduces long-term light-source drift.
Ventilated wall housing samples occupied-zone air while protecting the optical chamber.
Configurable analog and network outputs support both HVAC control and monitoring.
Обеспокоенность клиентов продуктами
CO₂ measurements are most useful when the sensor sees representative room air and its baseline behavior matches the occupancy pattern.
A sensor near a door or supply diffuser responds to transient air instead of the occupied zone.A stable wall location away from direct drafts provides a more representative room sample.
Automatic baseline correction is unsuitable for continuously occupied spaces.Selectable baseline strategy allows fixed or manually referenced calibration where CO₂ never falls to outdoor levels.
Dust or cleaning spray enters the optical path.Protected diffusion vents and an easy-wipe enclosure reduce direct contamination.
Ventilation controls and monitoring use separate sensors that disagree.Multiple outputs distribute one measured value to both systems.
Типичные приложения
Occupied cleanroom ventilationLaboratory room monitoringControlled production suitesClean corridors and support areas
Технические параметры
Typical materials and dimensions for a wall-mounted NDIR carbon dioxide sensor are listed below.
| Основной материал | NDIR optical chamber with infrared source and detector in flame-retardant polycarbonate housing |
|---|---|
| Толщина панели | 30-50 mm sensor depth |
| эффективная ширина | 90-130 mm housing width |
| Максимальная длина | Up to 150 mm housing height |
| Толщина линий стали | 0 mm; non-metallic wall enclosure |
| Плотность ядра | 1180-1220 kg/m³ for polycarbonate housing material |
| Теплопроводимость | 0.19-0.22 W/(m·K) for polycarbonate enclosure |
| Поверхностная отделка | Smooth white housing with black display window and green status indicator |
| Объединенный тип | Rear wall-mount base with protected diffusion vents and pluggable signal terminal |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Display or blank faceVoltage or 4-20 mA outputModbus or BACnet communicationSelectable baseline correction
Planning a Carbon Dioxide Sensor specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
