English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أنظمة التحكم في الغرف النظيفة والمراقبة البيئية
استشعار ثاني أكسيد الكربون
A wall-mounted NDIR sensor that measures carbon dioxide concentration for occupancy-related ventilation and cleanroom environmental trending.
- NDIR CO₂ Measurement
- Long-Term Optical Stability
- Ventilation Demand Signal
- Selectable 0-10 V, 4-20 mA or Fieldbus Output
مقدمة المنتج
The carbon dioxide sensor uses non-dispersive infrared absorption to measure CO₂ without consuming a reactive sensing material. Room air diffuses through protected openings into the optical chamber, where wavelength-selective measurement separates carbon dioxide absorption from the reference signal. Temperature compensation and baseline-management options support stable indoor operation. Selectable voltage, current or network outputs let ventilation controls, environmental monitoring and room displays use the same measured concentration.
الخصائص الرئيسية
A dual-channel or reference-compensated design reduces long-term light-source drift.
Ventilated wall housing samples occupied-zone air while protecting the optical chamber.
Configurable analog and network outputs support both HVAC control and monitoring.
مخاوف المنتج للعملاء
CO₂ measurements are most useful when the sensor sees representative room air and its baseline behavior matches the occupancy pattern.
A sensor near a door or supply diffuser responds to transient air instead of the occupied zone.A stable wall location away from direct drafts provides a more representative room sample.
Automatic baseline correction is unsuitable for continuously occupied spaces.Selectable baseline strategy allows fixed or manually referenced calibration where CO₂ never falls to outdoor levels.
Dust or cleaning spray enters the optical path.Protected diffusion vents and an easy-wipe enclosure reduce direct contamination.
Ventilation controls and monitoring use separate sensors that disagree.Multiple outputs distribute one measured value to both systems.
تطبيقات نموذجية
Occupied cleanroom ventilationLaboratory room monitoringControlled production suitesClean corridors and support areas
المعلمات الفنية
Typical materials and dimensions for a wall-mounted NDIR carbon dioxide sensor are listed below.
| المواد الأساسية | NDIR optical chamber with infrared source and detector in flame-retardant polycarbonate housing |
|---|---|
| سمك اللوحة | 30-50 mm sensor depth |
| العرض الفعال | 90-130 mm housing width |
| الحد الأقصى الطول | Up to 150 mm housing height |
| الصلب يواجه سمك | 0 mm; non-metallic wall enclosure |
| الكثافة الأساسية | 1180-1220 kg/m³ for polycarbonate housing material |
| الموصلية الحرارية | 0.19-0.22 W/(m·K) for polycarbonate enclosure |
| إنهاء السطح | Smooth white housing with black display window and green status indicator |
| نوع المشترك | Rear wall-mount base with protected diffusion vents and pluggable signal terminal |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Display or blank faceVoltage or 4-20 mA outputModbus or BACnet communicationSelectable baseline correction
Planning a Carbon Dioxide Sensor specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
