Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Instrumentos de ensaio e validação de sala limpa
Anemômetro
A handheld rotating-vane anemometer for measuring air velocity, temperature and calculated volume flow at cleanroom grilles, diffusers and ventilation openings.
- Area-averaged vane sensing for turbulent outlet flow.
- Telescopic articulating reach for ceiling measurements.
- Velocity, temperature and calculated air volume.
Introdução do produto
This anemometer uses a low-friction rotating vane to average airflow across a practical circular sensing area. The handheld display converts vane speed into velocity and, when an outlet area is entered, volumetric flow. An articulating telescopic shaft reaches overhead grilles and awkward openings while data averaging stabilizes readings in turbulent supply and return streams.
Características-chave
Articulating telescopic probe reaches overhead and recessed openings.
Integrated temperature sensing adds context to airflow readings.
User-entered area enables direct volume-flow calculation.
Timed and multi-point averaging supports repeatable traverses.
Handheld logging stores measurements for later reporting.
Preocupações do produto do cliente
Grille and diffuser measurements require a sensor that averages turbulence, stays aligned with the stream and reaches overhead points without disturbing the outlet.
Turbulent flow at a grille can make small sensors fluctuate.A large rotating vane spatially averages the stream and selectable time averaging smooths the display.
Overhead diffusers are difficult to reach while keeping the sensor aligned.A telescopic shaft and articulating head position the vane perpendicular to the flow.
Velocity alone does not show total flow through an outlet.Stored duct and grille areas allow the meter to calculate and display volumetric flow.
Manual records can lose the relationship between points in a traverse.Onboard logging and point statistics preserve individual, average and peak readings.
Aplicações típicas
Cleanroom supply and return grille surveysHVAC testing and balancingDiffuser airflow troubleshootingExhaust opening velocity measurementVentilation commissioning and maintenance
Parâmetros técnicos
Typical handheld rotating-vane construction values are shown below; vane diameter, probe reach and logging functions can be selected for the survey method.
| Material principal | Low-friction polymer vane rotor, protective ring, telescopic stainless probe shaft and overmolded handheld electronics |
|---|---|
| Painel de espessura | Typically 2.0-3.0 mm for the molded instrument housing |
| Largura efetiva | Approximately 100 mm across the rotating-vane sensing head |
| Comprimento máximo | Approximately 1000-1300 mm with the telescopic probe fully extended |
| Aço enfrentando espessura | Typically 0.5-1.0 mm for the telescopic stainless probe sections |
| Densidade Core | Approximately 7800-8000 kg/m³ for stainless telescopic components |
| Condutividade térmica | Approximately 14-17 W/(m·K) for stainless probe components |
| Superfície acabado | Dark graphite overmolded meter, black vane head and satin stainless telescopic shaft |
| Tipo conjunto | Articulating vane-head pivot with locking telescopic sections and keyed probe connector |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
100 mm or compact vane headsArticulating telescopic probeWireless display communicationProtective probe caseTripod or extension supportData download software
Planning a Anemometer specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
