Anemometer in three-quarter full view on a white background

クリーンルーム試験 · 検証機器

A 気圧計

A handheld rotating-vane anemometer for measuring air velocity, temperature and calculated volume flow at cleanroom grilles, diffusers and ventilation openings.

Area-averaged vane sensing for turbulent outlet flow.
Telescopic articulating reach for ceiling measurements.
Velocity, temperature and calculated air volume.

見積もりリクエスト製品案内

商品紹介

This anemometer uses a low-friction rotating vane to average airflow across a practical circular sensing area. The handheld display converts vane speed into velocity and, when an outlet area is entered, volumetric flow. An articulating telescopic shaft reaches overhead grilles and awkward openings while data averaging stabilizes readings in turbulent supply and return streams.

主要な特徴

Large rotating vane averages turbulent airflow over a practical area.

Articulating telescopic probe reaches overhead and recessed openings.

Integrated temperature sensing adds context to airflow readings.

User-entered area enables direct volume-flow calculation.

Timed and multi-point averaging supports repeatable traverses.

Handheld logging stores measurements for later reporting.

お客様の製品に関する懸念事項

Grille and diffuser measurements require a sensor that averages turbulence, stays aligned with the stream and reaches overhead points without disturbing the outlet.

Turbulent flow at a grille can make small sensors fluctuate.A large rotating vane spatially averages the stream and selectable time averaging smooths the display.

Overhead diffusers are difficult to reach while keeping the sensor aligned.A telescopic shaft and articulating head position the vane perpendicular to the flow.

Velocity alone does not show total flow through an outlet.Stored duct and grille areas allow the meter to calculate and display volumetric flow.

Manual records can lose the relationship between points in a traverse.Onboard logging and point statistics preserve individual, average and peak readings.

典型的な用途

Cleanroom supply and return grille surveysHVAC testing and balancingDiffuser airflow troubleshootingExhaust opening velocity measurementVentilation commissioning and maintenance

技術的なパラメータ

Typical handheld rotating-vane construction values are shown below; vane diameter, probe reach and logging functions can be selected for the survey method.

コア材料	Low-friction polymer vane rotor, protective ring, telescopic stainless probe shaft and overmolded handheld electronics
パネルの厚さ	Typically 2.0-3.0 mm for the molded instrument housing
有効幅	Approximately 100 mm across the rotating-vane sensing head
最大長さ	Approximately 1000-1300 mm with the telescopic probe fully extended
鋼鉄の厚さを直面する	Typically 0.5-1.0 mm for the telescopic stainless probe sections
コア密度	Approximately 7800-8000 kg/m³ for stainless telescopic components
熱伝導率	Approximately 14-17 W/(m·K) for stainless probe components
表面仕上げ	Dark graphite overmolded meter, black vane head and satin stainless telescopic shaft
ジョイントタイプ	Articulating vane-head pivot with locking telescopic sections and keyed probe connector
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

100 mm or compact vane headsArticulating telescopic probeWireless display communicationProtective probe caseTripod or extension supportData download software

Planning a Anemometer specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する