Anemometer in three-quarter full view on a white background

Приборы для испытаний и валидации в чистых помещениях

Анемометр

A handheld rotating-vane anemometer for measuring air velocity, temperature and calculated volume flow at cleanroom grilles, diffusers and ventilation openings.

Area-averaged vane sensing for turbulent outlet flow.
Telescopic articulating reach for ceiling measurements.
Velocity, temperature and calculated air volume.

Запрос котировки Просмотреть продукты

Введение продукции

This anemometer uses a low-friction rotating vane to average airflow across a practical circular sensing area. The handheld display converts vane speed into velocity and, when an outlet area is entered, volumetric flow. An articulating telescopic shaft reaches overhead grilles and awkward openings while data averaging stabilizes readings in turbulent supply and return streams.

Основные характеристики

Large rotating vane averages turbulent airflow over a practical area.

Articulating telescopic probe reaches overhead and recessed openings.

Integrated temperature sensing adds context to airflow readings.

User-entered area enables direct volume-flow calculation.

Timed and multi-point averaging supports repeatable traverses.

Handheld logging stores measurements for later reporting.

Обеспокоенность клиентов продуктами

Grille and diffuser measurements require a sensor that averages turbulence, stays aligned with the stream and reaches overhead points without disturbing the outlet.

Turbulent flow at a grille can make small sensors fluctuate.A large rotating vane spatially averages the stream and selectable time averaging smooths the display.

Overhead diffusers are difficult to reach while keeping the sensor aligned.A telescopic shaft and articulating head position the vane perpendicular to the flow.

Velocity alone does not show total flow through an outlet.Stored duct and grille areas allow the meter to calculate and display volumetric flow.

Manual records can lose the relationship between points in a traverse.Onboard logging and point statistics preserve individual, average and peak readings.

Типичные приложения

Cleanroom supply and return grille surveysHVAC testing and balancingDiffuser airflow troubleshootingExhaust opening velocity measurementVentilation commissioning and maintenance

Технические параметры

Typical handheld rotating-vane construction values are shown below; vane diameter, probe reach and logging functions can be selected for the survey method.

Основной материал	Low-friction polymer vane rotor, protective ring, telescopic stainless probe shaft and overmolded handheld electronics
Толщина панели	Typically 2.0-3.0 mm for the molded instrument housing
эффективная ширина	Approximately 100 mm across the rotating-vane sensing head
Максимальная длина	Approximately 1000-1300 mm with the telescopic probe fully extended
Толщина линий стали	Typically 0.5-1.0 mm for the telescopic stainless probe sections
Плотность ядра	Approximately 7800-8000 kg/m³ for stainless telescopic components
Теплопроводимость	Approximately 14-17 W/(m·K) for stainless probe components
Поверхностная отделка	Dark graphite overmolded meter, black vane head and satin stainless telescopic shaft
Объединенный тип	Articulating vane-head pivot with locking telescopic sections and keyed probe connector
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

100 mm or compact vane headsArticulating telescopic probeWireless display communicationProtective probe caseTripod or extension supportData download software

Planning a Anemometer specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой