Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Instrumentación de prueba y validación de sala limpia
Anemómetro
A handheld rotating-vane anemometer for measuring air velocity, temperature and calculated volume flow at cleanroom grilles, diffusers and ventilation openings.
- Area-averaged vane sensing for turbulent outlet flow.
- Telescopic articulating reach for ceiling measurements.
- Velocity, temperature and calculated air volume.
Introducción del producto
This anemometer uses a low-friction rotating vane to average airflow across a practical circular sensing area. The handheld display converts vane speed into velocity and, when an outlet area is entered, volumetric flow. An articulating telescopic shaft reaches overhead grilles and awkward openings while data averaging stabilizes readings in turbulent supply and return streams.
Características clave
Articulating telescopic probe reaches overhead and recessed openings.
Integrated temperature sensing adds context to airflow readings.
User-entered area enables direct volume-flow calculation.
Timed and multi-point averaging supports repeatable traverses.
Handheld logging stores measurements for later reporting.
Preocupaciones del producto del cliente
Grille and diffuser measurements require a sensor that averages turbulence, stays aligned with the stream and reaches overhead points without disturbing the outlet.
Turbulent flow at a grille can make small sensors fluctuate.A large rotating vane spatially averages the stream and selectable time averaging smooths the display.
Overhead diffusers are difficult to reach while keeping the sensor aligned.A telescopic shaft and articulating head position the vane perpendicular to the flow.
Velocity alone does not show total flow through an outlet.Stored duct and grille areas allow the meter to calculate and display volumetric flow.
Manual records can lose the relationship between points in a traverse.Onboard logging and point statistics preserve individual, average and peak readings.
Aplicaciones típicas
Cleanroom supply and return grille surveysHVAC testing and balancingDiffuser airflow troubleshootingExhaust opening velocity measurementVentilation commissioning and maintenance
Parámetros técnicos
Typical handheld rotating-vane construction values are shown below; vane diameter, probe reach and logging functions can be selected for the survey method.
| Materiales Core | Low-friction polymer vane rotor, protective ring, telescopic stainless probe shaft and overmolded handheld electronics |
|---|---|
| Panel de espesor | Typically 2.0-3.0 mm for the molded instrument housing |
| Ancho efectivo | Approximately 100 mm across the rotating-vane sensing head |
| Longitud máxima | Approximately 1000-1300 mm with the telescopic probe fully extended |
| Acero frente a espesor | Typically 0.5-1.0 mm for the telescopic stainless probe sections |
| Densidad Core | Approximately 7800-8000 kg/m³ for stainless telescopic components |
| Conductividad térmica | Approximately 14-17 W/(m·K) for stainless probe components |
| Superficie acabada | Dark graphite overmolded meter, black vane head and satin stainless telescopic shaft |
| Tipo conjunto | Articulating vane-head pivot with locking telescopic sections and keyed probe connector |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
100 mm or compact vane headsArticulating telescopic probeWireless display communicationProtective probe caseTripod or extension supportData download software
Planning a Anemometer specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
