English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أدوات اختبار الغرفة النظيفة والتحقق من صحتها
Aنيمومتر
A handheld rotating-vane anemometer for measuring air velocity, temperature and calculated volume flow at cleanroom grilles, diffusers and ventilation openings.
- Area-averaged vane sensing for turbulent outlet flow.
- Telescopic articulating reach for ceiling measurements.
- Velocity, temperature and calculated air volume.
مقدمة المنتج
This anemometer uses a low-friction rotating vane to average airflow across a practical circular sensing area. The handheld display converts vane speed into velocity and, when an outlet area is entered, volumetric flow. An articulating telescopic shaft reaches overhead grilles and awkward openings while data averaging stabilizes readings in turbulent supply and return streams.
الخصائص الرئيسية
Articulating telescopic probe reaches overhead and recessed openings.
Integrated temperature sensing adds context to airflow readings.
User-entered area enables direct volume-flow calculation.
Timed and multi-point averaging supports repeatable traverses.
Handheld logging stores measurements for later reporting.
مخاوف المنتج للعملاء
Grille and diffuser measurements require a sensor that averages turbulence, stays aligned with the stream and reaches overhead points without disturbing the outlet.
Turbulent flow at a grille can make small sensors fluctuate.A large rotating vane spatially averages the stream and selectable time averaging smooths the display.
Overhead diffusers are difficult to reach while keeping the sensor aligned.A telescopic shaft and articulating head position the vane perpendicular to the flow.
Velocity alone does not show total flow through an outlet.Stored duct and grille areas allow the meter to calculate and display volumetric flow.
Manual records can lose the relationship between points in a traverse.Onboard logging and point statistics preserve individual, average and peak readings.
تطبيقات نموذجية
Cleanroom supply and return grille surveysHVAC testing and balancingDiffuser airflow troubleshootingExhaust opening velocity measurementVentilation commissioning and maintenance
المعلمات الفنية
Typical handheld rotating-vane construction values are shown below; vane diameter, probe reach and logging functions can be selected for the survey method.
| المواد الأساسية | Low-friction polymer vane rotor, protective ring, telescopic stainless probe shaft and overmolded handheld electronics |
|---|---|
| سمك اللوحة | Typically 2.0-3.0 mm for the molded instrument housing |
| العرض الفعال | Approximately 100 mm across the rotating-vane sensing head |
| الحد الأقصى الطول | Approximately 1000-1300 mm with the telescopic probe fully extended |
| الصلب يواجه سمك | Typically 0.5-1.0 mm for the telescopic stainless probe sections |
| الكثافة الأساسية | Approximately 7800-8000 kg/m³ for stainless telescopic components |
| الموصلية الحرارية | Approximately 14-17 W/(m·K) for stainless probe components |
| إنهاء السطح | Dark graphite overmolded meter, black vane head and satin stainless telescopic shaft |
| نوع المشترك | Articulating vane-head pivot with locking telescopic sections and keyed probe connector |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
100 mm or compact vane headsArticulating telescopic probeWireless display communicationProtective probe caseTripod or extension supportData download software
Planning a Anemometer specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
