Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Fluxo laminar e equipamentos de contenção
Sistema de transferência rápida Alpha-Beta
A complete double-door transfer set combining a fixed Alpha barrier port with a removable Beta container, canister or bag interface.
- Matched Alpha and Beta Halves
- Bidirectional Closed Transfer
- Reusable or Single-Use Beta Options
- Docked Door Coupling
Introdução do produto
This system includes both the fixed Alpha part and the movable Beta transfer component. Each half has its own door, lock and seal. When docked, the two door faces couple and open as one assembly, creating a closed route between the container and the barrier chamber. The Beta side may be a reusable stainless canister, polymer container or single-use bag, allowing the same Alpha port to serve tools, components, waste or other suitable transfer loads.
Características-chave
Reusable canisters support heavier tools and organized internal racks.
Single-use Beta bags simplify lightweight component or waste transfer.
The coupled door faces remain isolated from the clean transfer path.
A transport trolley can support large containers during docking.
Preocupações do produto do cliente
The movable Beta half must match the fixed port, carry the actual load and remain supported during docking and undocking.
Heavy components overload a flexible transfer bag.A rigid stainless Beta container and internal rack support the load.
Disposable items make reusable canister cleaning inefficient.A compatible single-use Beta bag provides a separate lightweight option.
Large containers pull down on the barrier port.A height-adjustable trolley carries the Beta container during docking.
Mixed Alpha and Beta interfaces do not lock correctly.Matched dimensions, door geometry and seals are selected as one transfer set.
Aplicações típicas
Sterile component loadingTool transfer into isolatorsClosed waste removalBidirectional transfer between barrier systems
Parâmetros técnicos
Typical configurable construction ranges for an Alpha-Beta rapid transfer system are listed below.
| Material principal | SUS316L Alpha frame with stainless, polyethylene or multilayer-film Beta container and silicone seals |
|---|---|
| Painel de espessura | 30-80 mm compatible barrier-wall and container-door sections |
| Largura efetiva | 95-440 mm useful transfer diameter |
| Comprimento máximo | Up to 1200 mm reusable Beta container length |
| Aço enfrentando espessura | 2.0-4.0 mm SUS316L Alpha and rigid Beta components |
| Densidade Core | 930-970 kg/m³ for polyethylene Beta containers or approximately 8000 kg/m³ for stainless versions |
| Condutividade térmica | 0.33-0.50 W/(m·K) for polyethylene or 14-16 W/(m·K) for stainless versions |
| Superfície acabado | Electropolished stainless or smooth molded polymer with cleanable internal rack options |
| Tipo conjunto | Matched Alpha-Beta double-door coupling with rotational lock, lip seals and docking support interface |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Rigid stainless or polymer Beta containerSingle-use Beta bagInternal racks and hydrophobic vent filterHeight-adjustable transfer trolley
Planning a Alpha-Beta Rapid Transfer System specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
