Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Équipement d'écoulement et de confinement laminaires
Système de transfert rapide Alpha-Beta
A complete double-door transfer set combining a fixed Alpha barrier port with a removable Beta container, canister or bag interface.
- Matched Alpha and Beta Halves
- Bidirectional Closed Transfer
- Reusable or Single-Use Beta Options
- Docked Door Coupling
Introduction de produit
This system includes both the fixed Alpha part and the movable Beta transfer component. Each half has its own door, lock and seal. When docked, the two door faces couple and open as one assembly, creating a closed route between the container and the barrier chamber. The Beta side may be a reusable stainless canister, polymer container or single-use bag, allowing the same Alpha port to serve tools, components, waste or other suitable transfer loads.
Key Features
Reusable canisters support heavier tools and organized internal racks.
Single-use Beta bags simplify lightweight component or waste transfer.
The coupled door faces remain isolated from the clean transfer path.
A transport trolley can support large containers during docking.
Préoccupations du client produit
The movable Beta half must match the fixed port, carry the actual load and remain supported during docking and undocking.
Heavy components overload a flexible transfer bag.A rigid stainless Beta container and internal rack support the load.
Disposable items make reusable canister cleaning inefficient.A compatible single-use Beta bag provides a separate lightweight option.
Large containers pull down on the barrier port.A height-adjustable trolley carries the Beta container during docking.
Mixed Alpha and Beta interfaces do not lock correctly.Matched dimensions, door geometry and seals are selected as one transfer set.
Les applications typiques
Sterile component loadingTool transfer into isolatorsClosed waste removalBidirectional transfer between barrier systems
Paramètres techniques
Typical configurable construction ranges for an Alpha-Beta rapid transfer system are listed below.
| Matériaux de base | SUS316L Alpha frame with stainless, polyethylene or multilayer-film Beta container and silicone seals |
|---|---|
| Panneau épaisseur | 30-80 mm compatible barrier-wall and container-door sections |
| Largeur effective | 95-440 mm useful transfer diameter |
| Longueur maximale | Up to 1200 mm reusable Beta container length |
| Acier face épaisseur | 2.0-4.0 mm SUS316L Alpha and rigid Beta components |
| Densité Core | 930-970 kg/m³ for polyethylene Beta containers or approximately 8000 kg/m³ for stainless versions |
| Conductivité thermique | 0.33-0.50 W/(m·K) for polyethylene or 14-16 W/(m·K) for stainless versions |
| surface finie | Electropolished stainless or smooth molded polymer with cleanable internal rack options |
| Type joint | Matched Alpha-Beta double-door coupling with rotational lock, lip seals and docking support interface |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Rigid stainless or polymer Beta containerSingle-use Beta bagInternal racks and hydrophobic vent filterHeight-adjustable transfer trolley
Planning a Alpha-Beta Rapid Transfer System specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
