English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات التدفق والاحتواء الصفائحية
نظام النقل السريع ألفا بيتا
A complete double-door transfer set combining a fixed Alpha barrier port with a removable Beta container, canister or bag interface.
- Matched Alpha and Beta Halves
- Bidirectional Closed Transfer
- Reusable or Single-Use Beta Options
- Docked Door Coupling
مقدمة المنتج
This system includes both the fixed Alpha part and the movable Beta transfer component. Each half has its own door, lock and seal. When docked, the two door faces couple and open as one assembly, creating a closed route between the container and the barrier chamber. The Beta side may be a reusable stainless canister, polymer container or single-use bag, allowing the same Alpha port to serve tools, components, waste or other suitable transfer loads.
الخصائص الرئيسية
Reusable canisters support heavier tools and organized internal racks.
Single-use Beta bags simplify lightweight component or waste transfer.
The coupled door faces remain isolated from the clean transfer path.
A transport trolley can support large containers during docking.
مخاوف المنتج للعملاء
The movable Beta half must match the fixed port, carry the actual load and remain supported during docking and undocking.
Heavy components overload a flexible transfer bag.A rigid stainless Beta container and internal rack support the load.
Disposable items make reusable canister cleaning inefficient.A compatible single-use Beta bag provides a separate lightweight option.
Large containers pull down on the barrier port.A height-adjustable trolley carries the Beta container during docking.
Mixed Alpha and Beta interfaces do not lock correctly.Matched dimensions, door geometry and seals are selected as one transfer set.
تطبيقات نموذجية
Sterile component loadingTool transfer into isolatorsClosed waste removalBidirectional transfer between barrier systems
المعلمات الفنية
Typical configurable construction ranges for an Alpha-Beta rapid transfer system are listed below.
| المواد الأساسية | SUS316L Alpha frame with stainless, polyethylene or multilayer-film Beta container and silicone seals |
|---|---|
| سمك اللوحة | 30-80 mm compatible barrier-wall and container-door sections |
| العرض الفعال | 95-440 mm useful transfer diameter |
| الحد الأقصى الطول | Up to 1200 mm reusable Beta container length |
| الصلب يواجه سمك | 2.0-4.0 mm SUS316L Alpha and rigid Beta components |
| الكثافة الأساسية | 930-970 kg/m³ for polyethylene Beta containers or approximately 8000 kg/m³ for stainless versions |
| الموصلية الحرارية | 0.33-0.50 W/(m·K) for polyethylene or 14-16 W/(m·K) for stainless versions |
| إنهاء السطح | Electropolished stainless or smooth molded polymer with cleanable internal rack options |
| نوع المشترك | Matched Alpha-Beta double-door coupling with rotational lock, lip seals and docking support interface |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Rigid stainless or polymer Beta containerSingle-use Beta bagInternal racks and hydrophobic vent filterHeight-adjustable transfer trolley
Planning a Alpha-Beta Rapid Transfer System specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
