Complete Alpha-Beta rapid transfer system with rigid container docked

Laminar Flow and Containment Equipment 에 대한 리뷰 보기

알파 - 베타 고속 전송 시스템 (Alpha - Beta Rapid Transfer System)

A complete double-door transfer set combining a fixed Alpha barrier port with a removable Beta container, canister or bag interface.

Matched Alpha and Beta Halves
Bidirectional Closed Transfer
Reusable or Single-Use Beta Options
Docked Door Coupling

견적 요청 제품 찾아보기

상품 소개

This system includes both the fixed Alpha part and the movable Beta transfer component. Each half has its own door, lock and seal. When docked, the two door faces couple and open as one assembly, creating a closed route between the container and the barrier chamber. The Beta side may be a reusable stainless canister, polymer container or single-use bag, allowing the same Alpha port to serve tools, components, waste or other suitable transfer loads.

주요 기능

Matched Alpha and Beta components form one interlocked double-door assembly.

Reusable canisters support heavier tools and organized internal racks.

Single-use Beta bags simplify lightweight component or waste transfer.

The coupled door faces remain isolated from the clean transfer path.

A transport trolley can support large containers during docking.

고객 제품 관심사

The movable Beta half must match the fixed port, carry the actual load and remain supported during docking and undocking.

Heavy components overload a flexible transfer bag.A rigid stainless Beta container and internal rack support the load.

Disposable items make reusable canister cleaning inefficient.A compatible single-use Beta bag provides a separate lightweight option.

Large containers pull down on the barrier port.A height-adjustable trolley carries the Beta container during docking.

Mixed Alpha and Beta interfaces do not lock correctly.Matched dimensions, door geometry and seals are selected as one transfer set.

일반적인 응용 프로그램

Sterile component loadingTool transfer into isolatorsClosed waste removalBidirectional transfer between barrier systems

기술 매개변수

Typical configurable construction ranges for an Alpha-Beta rapid transfer system are listed below.

핵심 재료	SUS316L Alpha frame with stainless, polyethylene or multilayer-film Beta container and silicone seals
패널 두께	30-80 mm compatible barrier-wall and container-door sections
유효 폭	95-440 mm useful transfer diameter
최대 길이	Up to 1200 mm reusable Beta container length
강철 면면 두께	2.0-4.0 mm SUS316L Alpha and rigid Beta components
코어 밀도	930-970 kg/m³ for polyethylene Beta containers or approximately 8000 kg/m³ for stainless versions
열전도도 (Thermal Conductivity)	0.33-0.50 W/(m·K) for polyethylene or 14-16 W/(m·K) for stainless versions
표면 마무리	Electropolished stainless or smooth molded polymer with cleanable internal rack options
접합 유형	Matched Alpha-Beta double-door coupling with rotational lock, lip seals and docking support interface
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Rigid stainless or polymer Beta containerSingle-use Beta bagInternal racks and hydrophobic vent filterHeight-adjustable transfer trolley

Planning a Alpha-Beta Rapid Transfer System specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.