Complete Alpha-Beta rapid transfer system with rigid container docked

Aliran Laminar dan Peralatan Penahanan

Sistem Transfer Cepat Alpha-Beta

A complete double-door transfer set combining a fixed Alpha barrier port with a removable Beta container, canister or bag interface.

Matched Alpha and Beta Halves
Bidirectional Closed Transfer
Reusable or Single-Use Beta Options
Docked Door Coupling

Permintaan untuk kutipan Browse Produk

Perkenalan produk

This system includes both the fixed Alpha part and the movable Beta transfer component. Each half has its own door, lock and seal. When docked, the two door faces couple and open as one assembly, creating a closed route between the container and the barrier chamber. The Beta side may be a reusable stainless canister, polymer container or single-use bag, allowing the same Alpha port to serve tools, components, waste or other suitable transfer loads.

Fitur utama:

Matched Alpha and Beta components form one interlocked double-door assembly.

Reusable canisters support heavier tools and organized internal racks.

Single-use Beta bags simplify lightweight component or waste transfer.

The coupled door faces remain isolated from the clean transfer path.

A transport trolley can support large containers during docking.

Kekhawatiran produk pelanggan

The movable Beta half must match the fixed port, carry the actual load and remain supported during docking and undocking.

Heavy components overload a flexible transfer bag.A rigid stainless Beta container and internal rack support the load.

Disposable items make reusable canister cleaning inefficient.A compatible single-use Beta bag provides a separate lightweight option.

Large containers pull down on the barrier port.A height-adjustable trolley carries the Beta container during docking.

Mixed Alpha and Beta interfaces do not lock correctly.Matched dimensions, door geometry and seals are selected as one transfer set.

Aplikasi yang Tipis

Sterile component loadingTool transfer into isolatorsClosed waste removalBidirectional transfer between barrier systems

Parameter teknis

Typical configurable construction ranges for an Alpha-Beta rapid transfer system are listed below.

Bahan inti	SUS316L Alpha frame with stainless, polyethylene or multilayer-film Beta container and silicone seals
Ketebalan Panel (Panel Thickness)	30-80 mm compatible barrier-wall and container-door sections
Efektif lebar	95-440 mm useful transfer diameter
Panjang maksimum	Up to 1200 mm reusable Beta container length
Baja menghadap ketebalan	2.0-4.0 mm SUS316L Alpha and rigid Beta components
Kepadatan inti (core density)	930-970 kg/m³ for polyethylene Beta containers or approximately 8000 kg/m³ for stainless versions
Konduktivitas Termal (Thermal Conductivity)	0.33-0.50 W/(m·K) for polyethylene or 14-16 W/(m·K) for stainless versions
Permukaan selesai	Electropolished stainless or smooth molded polymer with cleanable internal rack options
Jenis Bersama	Matched Alpha-Beta double-door coupling with rotational lock, lip seals and docking support interface
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Rigid stainless or polymer Beta containerSingle-use Beta bagInternal racks and hydrophobic vent filterHeight-adjustable transfer trolley

Planning a Alpha-Beta Rapid Transfer System specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami