EnglishCurrent
德语
阿拉伯语
法语
印尼语
日语
韩语
马来语
葡萄牙语
俄语
西班牙语
泰语
土耳其语
越南语
Industry-Specific Cleanroom Equipment
Rapid Transfer Port
A sealed alpha-beta docking system that transfers materials through an isolator wall without exposing the critical process zone to the surrounding room.
- Alpha-Beta Double Door
- Sealed Docking Interface
- Mechanical Interlock
- Reusable Transfer Container
Product Introduction
The rapid transfer port system combines a fixed alpha flange on the barrier with a mating beta container. When docked and locked, the two doors open together so their previously exposed faces remain sealed away from the transfer path. A defined rotational lock, elastomer seal and status indication guide repeatable connection and prevent opening when the container is not correctly engaged.
Key Features
Mechanical locking sequence prevents opening before the container is fully docked.
Replaceable elastomer sealing rings maintain a cleanable, pressure-resistant interface.
Reusable stainless beta containers support tools, components and waste transfers.
Customer Product Concerns
Opening a conventional hatch connects the surrounding room directly to the isolator chamber and exposes door surfaces to the transfer route.
External door surfaces can enter the protected transfer path.Coupled double doors retain contaminated faces together and outside the open passage.
Partial docking can damage seals or compromise containment.A defined mechanical lock sequence confirms engagement before opening is possible.
Different loads require multiple transfer volumes.Compatible beta containers can be selected around the required port diameter and payload.
Operators need immediate connection-state feedback.Status indicators and optional position sensing show docked, locked and release conditions.
Typical Applications
Isolator material transferAseptic filling-line component entryHigh-containment waste removalSterile process-tool introduction
Technical Parameters
Typical construction values for a pharmaceutical rapid transfer port system are listed below.
| Core Material | 316L stainless steel alpha flange and beta container with silicone or EPDM double-door seals |
|---|---|
| Panel Thickness | 50-120 mm compatible barrier-wall thickness |
| Effective Width | 105-350 mm nominal transfer-port diameter |
| Maximum Length | Up to 800 mm beta container length |
| Steel Facing Thickness | 1.2-2.0 mm stainless beta container wall |
| Core Density | 1100-1250 kg/m³ for elastomer sealing components |
| Thermal Conductivity | 0.20-0.30 W/(m·K) for elastomer sealing material |
| Surface Finish | Satin 316L stainless steel with smooth white polymer ring and blue cleanroom seal |
| Joint Type | Rotational alpha-beta docking interface with coupled double doors, mechanical interlock and replaceable circular seal |
| Customization | Available based on the intended application and operating environment. |
Available Options
Multiple nominal port diametersStainless or polymer beta containersPosition sensing and remote status outputBag, container and waste-transfer accessories
Planning a Rapid Transfer Port specification?
Send us your dimensions, installation conditions, performance targets and required surface finish.
