Rapid transfer port system complete three-quarter view with docked stainless beta container

Оборудование для чистых помещений

Порт быстрой перевозки

A sealed alpha-beta docking system that transfers materials through an isolator wall without exposing the critical process zone to the surrounding room.

Alpha-Beta Double Door
Sealed Docking Interface
Mechanical Interlock
Reusable Transfer Container

Запрос котировки Просмотреть продукты

Введение продукции

The rapid transfer port system combines a fixed alpha flange on the barrier with a mating beta container. When docked and locked, the two doors open together so their previously exposed faces remain sealed away from the transfer path. A defined rotational lock, elastomer seal and status indication guide repeatable connection and prevent opening when the container is not correctly engaged.

Основные характеристики

Coupled alpha and beta doors keep external door surfaces outside the clean transfer path.

Mechanical locking sequence prevents opening before the container is fully docked.

Replaceable elastomer sealing rings maintain a cleanable, pressure-resistant interface.

Reusable stainless beta containers support tools, components and waste transfers.

Обеспокоенность клиентов продуктами

Opening a conventional hatch connects the surrounding room directly to the isolator chamber and exposes door surfaces to the transfer route.

External door surfaces can enter the protected transfer path.Coupled double doors retain contaminated faces together and outside the open passage.

Partial docking can damage seals or compromise containment.A defined mechanical lock sequence confirms engagement before opening is possible.

Different loads require multiple transfer volumes.Compatible beta containers can be selected around the required port diameter and payload.

Operators need immediate connection-state feedback.Status indicators and optional position sensing show docked, locked and release conditions.

Типичные приложения

Isolator material transferAseptic filling-line component entryHigh-containment waste removalSterile process-tool introduction

Технические параметры

Typical construction values for a pharmaceutical rapid transfer port system are listed below.

Основной материал	316L stainless steel alpha flange and beta container with silicone or EPDM double-door seals
Толщина панели	50-120 mm compatible barrier-wall thickness
эффективная ширина	105-350 mm nominal transfer-port diameter
Максимальная длина	Up to 800 mm beta container length
Толщина линий стали	1.2-2.0 mm stainless beta container wall
Плотность ядра	1100-1250 kg/m³ for elastomer sealing components
Теплопроводимость	0.20-0.30 W/(m·K) for elastomer sealing material
Поверхностная отделка	Satin 316L stainless steel with smooth white polymer ring and blue cleanroom seal
Объединенный тип	Rotational alpha-beta docking interface with coupled double doors, mechanical interlock and replaceable circular seal
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

Multiple nominal port diametersStainless or polymer beta containersPosition sensing and remote status outputBag, container and waste-transfer accessories

Planning a Rapid Transfer Port specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой