English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات الغرف النظيفة المحددة للصناعة
ميناء نقل سريع
A sealed alpha-beta docking system that transfers materials through an isolator wall without exposing the critical process zone to the surrounding room.
- Alpha-Beta Double Door
- Sealed Docking Interface
- Mechanical Interlock
- Reusable Transfer Container
مقدمة المنتج
The rapid transfer port system combines a fixed alpha flange on the barrier with a mating beta container. When docked and locked, the two doors open together so their previously exposed faces remain sealed away from the transfer path. A defined rotational lock, elastomer seal and status indication guide repeatable connection and prevent opening when the container is not correctly engaged.
الخصائص الرئيسية
Mechanical locking sequence prevents opening before the container is fully docked.
Replaceable elastomer sealing rings maintain a cleanable, pressure-resistant interface.
Reusable stainless beta containers support tools, components and waste transfers.
مخاوف المنتج للعملاء
Opening a conventional hatch connects the surrounding room directly to the isolator chamber and exposes door surfaces to the transfer route.
External door surfaces can enter the protected transfer path.Coupled double doors retain contaminated faces together and outside the open passage.
Partial docking can damage seals or compromise containment.A defined mechanical lock sequence confirms engagement before opening is possible.
Different loads require multiple transfer volumes.Compatible beta containers can be selected around the required port diameter and payload.
Operators need immediate connection-state feedback.Status indicators and optional position sensing show docked, locked and release conditions.
تطبيقات نموذجية
Isolator material transferAseptic filling-line component entryHigh-containment waste removalSterile process-tool introduction
المعلمات الفنية
Typical construction values for a pharmaceutical rapid transfer port system are listed below.
| المواد الأساسية | 316L stainless steel alpha flange and beta container with silicone or EPDM double-door seals |
|---|---|
| سمك اللوحة | 50-120 mm compatible barrier-wall thickness |
| العرض الفعال | 105-350 mm nominal transfer-port diameter |
| الحد الأقصى الطول | Up to 800 mm beta container length |
| الصلب يواجه سمك | 1.2-2.0 mm stainless beta container wall |
| الكثافة الأساسية | 1100-1250 kg/m³ for elastomer sealing components |
| الموصلية الحرارية | 0.20-0.30 W/(m·K) for elastomer sealing material |
| إنهاء السطح | Satin 316L stainless steel with smooth white polymer ring and blue cleanroom seal |
| نوع المشترك | Rotational alpha-beta docking interface with coupled double doors, mechanical interlock and replaceable circular seal |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Multiple nominal port diametersStainless or polymer beta containersPosition sensing and remote status outputBag, container and waste-transfer accessories
Planning a Rapid Transfer Port specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
