EnglishCurrent
德语
阿拉伯语
法语
印尼语
日语
韩语
马来语
葡萄牙语
俄语
西班牙语
泰语
土耳其语
越南语
ESD and Antistatic Products
Overhead Ionizing Blower
The Overhead Ionizing Blower is a suspended three-fan static-neutralization system designed to provide broad, balanced ion coverage and task lighting over ESD-controlled workstations.
- Three evenly spaced fans distribute balanced ionized air across a complete workstation.
- Two integrated task lights illuminate assembly and inspection areas without separate bench fixtures.
- Suspended installation keeps the worksurface clear while adjustable airflow serves different process distances.
Product Introduction
This overhead unit arranges three guarded axial fans in a long powder-coated enclosure to distribute ionized air across a wide bench. Three lower outlets direct airflow toward the worksurface, while two recessed LED task lights support visual assembly and inspection. A front airflow control and operating lamp provide simple local adjustment and status feedback. Two top suspension points support chain mounting, and removable front and rear guards allow access to the fans and emitter regions for planned cleaning.
Key Features
Balanced positive and negative ion output neutralizes charge on isolated parts and packaging materials.
Variable airflow accommodates different suspension heights, part sizes and operator comfort levels.
Dual recessed task lights provide even illumination beneath the blower.
Two suspension points maintain stable alignment above the center of the workstation.
Removable safety guards support routine fan and emitter-point maintenance.
Operating-status indication gives the user a quick visual check before handling sensitive devices.
Customer Product Concerns
A wide bench can retain charged zones outside the airflow of a compact ionizer, while valuable worksurface space must remain available for tools and assemblies.
One small fan leaves weak ion coverage at the ends of a long bench.Three separated fan modules distribute ionized air across the full workstation width.
A benchtop ionizer competes with tools, fixtures and material containers.Chain suspension moves the blower above the process and keeps the surface clear.
High airflow can disturb small parts and films.Variable fan control allows the air volume to be matched to suspension height and material weight.
Overhead equipment can shade the operator's inspection area.Two integrated task lights illuminate the work zone directly beneath the enclosure.
Emitter contamination is difficult to identify and service in a closed housing.Removable guards and accessible emitter regions support scheduled inspection and cleaning.
Typical Applications
Electronics and PCB assembly workstations.Semiconductor back-end handling and inspection benches.Medical-device assembly and packaging.Flat-panel and optical-module production.Clean manufacturing benches requiring broad ion coverage.Static-sensitive repair, test and quality-control stations.
Technical Parameters
The representative three-fan configuration below is intended for full-bench ESD coverage. Fan quantity, voltage, lighting, heating, alarm outputs, filters and suspension hardware can be selected for the required workstation width and facility supply.
| Core Material | Powder-coated formed-steel housing with polymer fan guards, axial fans and stainless-steel emitter points |
|---|---|
| Panel Thickness | 1.0–1.5 mm enclosure-panel thickness |
| Effective Width | 800–1100 mm nominal ionized-air coverage width at the blower face |
| Maximum Length | Up to 1100 mm overall three-fan housing length |
| Steel Facing Thickness | 1.0–1.5 mm powder-coated steel facing thickness |
| Core Density | 7800–8000 kg/m³ steel enclosure-material density |
| Thermal Conductivity | 14–17 W/(m·K) for stainless-steel emitter and enclosure components |
| Surface Finish | Neutral off-white textured powder coat with matte black guards and warm-white recessed task lights |
| Joint Type | Three aligned guarded fan modules in one suspended enclosure with dual chain brackets and integrated power connection |
| Customization | Available based on the intended application and operating environment. |
Available Options
Two-fan or three-fan enclosure width.100–120 VAC or 220–230 VAC supply configuration.Adjustable or self-balancing ion output.Emitter-point cleaning mechanism.Removable fan filters.Heater-assisted airflow.Audible alarm and facility-monitoring connection.Alternative suspension chain, S-hook and mounting-bracket kits.
Planning a Overhead Ionizing Blower specification?
Send us your dimensions, installation conditions, performance targets and required surface finish.
