Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
ESD e produtos antiestáticos
Blower Ionizante Overhead
The Overhead Ionizing Blower is a suspended three-fan static-neutralization system designed to provide broad, balanced ion coverage and task lighting over ESD-controlled workstations.
- Three evenly spaced fans distribute balanced ionized air across a complete workstation.
- Two integrated task lights illuminate assembly and inspection areas without separate bench fixtures.
- Suspended installation keeps the worksurface clear while adjustable airflow serves different process distances.
Introdução do produto
This overhead unit arranges three guarded axial fans in a long powder-coated enclosure to distribute ionized air across a wide bench. Three lower outlets direct airflow toward the worksurface, while two recessed LED task lights support visual assembly and inspection. A front airflow control and operating lamp provide simple local adjustment and status feedback. Two top suspension points support chain mounting, and removable front and rear guards allow access to the fans and emitter regions for planned cleaning.
Características-chave
Balanced positive and negative ion output neutralizes charge on isolated parts and packaging materials.
Variable airflow accommodates different suspension heights, part sizes and operator comfort levels.
Dual recessed task lights provide even illumination beneath the blower.
Two suspension points maintain stable alignment above the center of the workstation.
Removable safety guards support routine fan and emitter-point maintenance.
Operating-status indication gives the user a quick visual check before handling sensitive devices.
Preocupações do produto do cliente
A wide bench can retain charged zones outside the airflow of a compact ionizer, while valuable worksurface space must remain available for tools and assemblies.
One small fan leaves weak ion coverage at the ends of a long bench.Three separated fan modules distribute ionized air across the full workstation width.
A benchtop ionizer competes with tools, fixtures and material containers.Chain suspension moves the blower above the process and keeps the surface clear.
High airflow can disturb small parts and films.Variable fan control allows the air volume to be matched to suspension height and material weight.
Overhead equipment can shade the operator's inspection area.Two integrated task lights illuminate the work zone directly beneath the enclosure.
Emitter contamination is difficult to identify and service in a closed housing.Removable guards and accessible emitter regions support scheduled inspection and cleaning.
Aplicações típicas
Electronics and PCB assembly workstations.Semiconductor back-end handling and inspection benches.Medical-device assembly and packaging.Flat-panel and optical-module production.Clean manufacturing benches requiring broad ion coverage.Static-sensitive repair, test and quality-control stations.
Parâmetros técnicos
The representative three-fan configuration below is intended for full-bench ESD coverage. Fan quantity, voltage, lighting, heating, alarm outputs, filters and suspension hardware can be selected for the required workstation width and facility supply.
| Material principal | Powder-coated formed-steel housing with polymer fan guards, axial fans and stainless-steel emitter points |
|---|---|
| Painel de espessura | 1.0–1.5 mm enclosure-panel thickness |
| Largura efetiva | 800–1100 mm nominal ionized-air coverage width at the blower face |
| Comprimento máximo | Up to 1100 mm overall three-fan housing length |
| Aço enfrentando espessura | 1.0–1.5 mm powder-coated steel facing thickness |
| Densidade Core | 7800–8000 kg/m³ steel enclosure-material density |
| Condutividade térmica | 14–17 W/(m·K) for stainless-steel emitter and enclosure components |
| Superfície acabado | Neutral off-white textured powder coat with matte black guards and warm-white recessed task lights |
| Tipo conjunto | Three aligned guarded fan modules in one suspended enclosure with dual chain brackets and integrated power connection |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Two-fan or three-fan enclosure width.100–120 VAC or 220–230 VAC supply configuration.Adjustable or self-balancing ion output.Emitter-point cleaning mechanism.Removable fan filters.Heater-assisted airflow.Audible alarm and facility-monitoring connection.Alternative suspension chain, S-hook and mounting-bracket kits.
Planning a Overhead Ionizing Blower specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
