English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
ESD والمنتجات المضادة للساكنة
Overhead المؤين منفاخ
The Overhead Ionizing Blower is a suspended three-fan static-neutralization system designed to provide broad, balanced ion coverage and task lighting over ESD-controlled workstations.
- Three evenly spaced fans distribute balanced ionized air across a complete workstation.
- Two integrated task lights illuminate assembly and inspection areas without separate bench fixtures.
- Suspended installation keeps the worksurface clear while adjustable airflow serves different process distances.
مقدمة المنتج
This overhead unit arranges three guarded axial fans in a long powder-coated enclosure to distribute ionized air across a wide bench. Three lower outlets direct airflow toward the worksurface, while two recessed LED task lights support visual assembly and inspection. A front airflow control and operating lamp provide simple local adjustment and status feedback. Two top suspension points support chain mounting, and removable front and rear guards allow access to the fans and emitter regions for planned cleaning.
الخصائص الرئيسية
Balanced positive and negative ion output neutralizes charge on isolated parts and packaging materials.
Variable airflow accommodates different suspension heights, part sizes and operator comfort levels.
Dual recessed task lights provide even illumination beneath the blower.
Two suspension points maintain stable alignment above the center of the workstation.
Removable safety guards support routine fan and emitter-point maintenance.
Operating-status indication gives the user a quick visual check before handling sensitive devices.
مخاوف المنتج للعملاء
A wide bench can retain charged zones outside the airflow of a compact ionizer, while valuable worksurface space must remain available for tools and assemblies.
One small fan leaves weak ion coverage at the ends of a long bench.Three separated fan modules distribute ionized air across the full workstation width.
A benchtop ionizer competes with tools, fixtures and material containers.Chain suspension moves the blower above the process and keeps the surface clear.
High airflow can disturb small parts and films.Variable fan control allows the air volume to be matched to suspension height and material weight.
Overhead equipment can shade the operator's inspection area.Two integrated task lights illuminate the work zone directly beneath the enclosure.
Emitter contamination is difficult to identify and service in a closed housing.Removable guards and accessible emitter regions support scheduled inspection and cleaning.
تطبيقات نموذجية
Electronics and PCB assembly workstations.Semiconductor back-end handling and inspection benches.Medical-device assembly and packaging.Flat-panel and optical-module production.Clean manufacturing benches requiring broad ion coverage.Static-sensitive repair, test and quality-control stations.
المعلمات الفنية
The representative three-fan configuration below is intended for full-bench ESD coverage. Fan quantity, voltage, lighting, heating, alarm outputs, filters and suspension hardware can be selected for the required workstation width and facility supply.
| المواد الأساسية | Powder-coated formed-steel housing with polymer fan guards, axial fans and stainless-steel emitter points |
|---|---|
| سمك اللوحة | 1.0–1.5 mm enclosure-panel thickness |
| العرض الفعال | 800–1100 mm nominal ionized-air coverage width at the blower face |
| الحد الأقصى الطول | Up to 1100 mm overall three-fan housing length |
| الصلب يواجه سمك | 1.0–1.5 mm powder-coated steel facing thickness |
| الكثافة الأساسية | 7800–8000 kg/m³ steel enclosure-material density |
| الموصلية الحرارية | 14–17 W/(m·K) for stainless-steel emitter and enclosure components |
| إنهاء السطح | Neutral off-white textured powder coat with matte black guards and warm-white recessed task lights |
| نوع المشترك | Three aligned guarded fan modules in one suspended enclosure with dual chain brackets and integrated power connection |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Two-fan or three-fan enclosure width.100–120 VAC or 220–230 VAC supply configuration.Adjustable or self-balancing ion output.Emitter-point cleaning mechanism.Removable fan filters.Heater-assisted airflow.Audible alarm and facility-monitoring connection.Alternative suspension chain, S-hook and mounting-bracket kits.
Planning a Overhead Ionizing Blower specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
