EnglishCurrent
德语
阿拉伯语
法语
印尼语
日语
韩语
马来语
葡萄牙语
俄语
西班牙语
泰语
土耳其语
越南语
Cleanroom Doors, Windows and Interlock Systems
Manual Cleanroom Sliding Door
A manually operated 50 mm insulated sliding leaf suspended from an enclosed overhead track, giving wide cleanroom access without occupying a swing arc.
- No Swing Arc Required
- Enclosed Overhead Track
- Threshold-Free Floor
- Manual Low-Force Operation
Product Introduction
The Manual Cleanroom Sliding Door carries a rock-wool-cored leaf on sealed trolley assemblies inside an accessible overhead rail cover. The leaf moves parallel with the wall and is guided at floor level without a full-length dirt-catching track. An edge-mounted pull and recessed closing handle keep the face clear, while the perimeter seal meets the frame when the leaf reaches its closed position.
Key Features
Overhead trolleys carry the door weight without a continuous floor track.
An accessible sloped track cover shields rollers from room-side contamination.
Rock-wool infill adds stiffness and acoustic mass to the sliding leaf.
Manual operation remains available without electrical power or control sensors.
Customer Product Concerns
Manual sliding doors solve space conflicts but must remain easy to move, accessible for roller maintenance and free from floor-level contamination traps.
A swing leaf collides with equipment or blocks a narrow corridor.The sliding leaf travels parallel to the partition and keeps the approach zone open.
A floor track traps residue and obstructs carts.Overhead suspension uses only a compact floor guide outside the primary passage line.
Heavy manual doors accelerate quickly and strike the end stop.Precision rollers and optional soft-close damping control travel near each end position.
Enclosed rollers become difficult to inspect and clean.A removable sloped hood provides service access without dismantling the wall frame.
Typical Applications
Narrow cleanroom corridorsEquipment transfer openingsLaboratory rooms with limited swing clearanceCold and controlled production roomsClean utility access
Technical Parameters
Representative dimensions for a manually operated cleanroom sliding doorset are listed below.
| Core Material | High-density mineral wool |
|---|---|
| Panel Thickness | 50 mm sliding door leaf |
| Effective Width | 750-1600 mm clear opening |
| Maximum Length | 2400 mm maximum leaf height |
| Steel Facing Thickness | 0.8-1.0 mm coated steel leaf skins |
| Core Density | 96-120 kg/m³ mineral wool |
| Thermal Conductivity | 0.035-0.045 W/(m·K) typical mineral-wool range |
| Surface Finish | Pre-coated or powder-coated smooth steel with aluminum edge frame |
| Joint Type | Overhead trolley rail with floor guide and EPDM leaf-edge seal |
| Customization | Available based on the intended application and operating environment |
Available Options
Soft-close end dampingFlush vision panelStainless track coverInterlock-ready magnetic lock
Planning a Manual Cleanroom Sliding Door specification?
Send us your dimensions, installation conditions, performance targets and required surface finish.
