Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Portes de salle blanche, fenêtres et systèmes de verrouillage
Porte coulissante de salle blanche manuelle
A manually operated 50 mm insulated sliding leaf suspended from an enclosed overhead track, giving wide cleanroom access without occupying a swing arc.
- No Swing Arc Required
- Enclosed Overhead Track
- Threshold-Free Floor
- Manual Low-Force Operation
Introduction de produit
The Manual Cleanroom Sliding Door carries a rock-wool-cored leaf on sealed trolley assemblies inside an accessible overhead rail cover. The leaf moves parallel with the wall and is guided at floor level without a full-length dirt-catching track. An edge-mounted pull and recessed closing handle keep the face clear, while the perimeter seal meets the frame when the leaf reaches its closed position.
Key Features
Overhead trolleys carry the door weight without a continuous floor track.
An accessible sloped track cover shields rollers from room-side contamination.
Rock-wool infill adds stiffness and acoustic mass to the sliding leaf.
Manual operation remains available without electrical power or control sensors.
Préoccupations du client produit
Manual sliding doors solve space conflicts but must remain easy to move, accessible for roller maintenance and free from floor-level contamination traps.
A swing leaf collides with equipment or blocks a narrow corridor.The sliding leaf travels parallel to the partition and keeps the approach zone open.
A floor track traps residue and obstructs carts.Overhead suspension uses only a compact floor guide outside the primary passage line.
Heavy manual doors accelerate quickly and strike the end stop.Precision rollers and optional soft-close damping control travel near each end position.
Enclosed rollers become difficult to inspect and clean.A removable sloped hood provides service access without dismantling the wall frame.
Les applications typiques
Narrow cleanroom corridorsEquipment transfer openingsLaboratory rooms with limited swing clearanceCold and controlled production roomsClean utility access
Paramètres techniques
Representative dimensions for a manually operated cleanroom sliding doorset are listed below.
| Matériaux de base | High-density mineral wool |
|---|---|
| Panneau épaisseur | 50 mm sliding door leaf |
| Largeur effective | 750-1600 mm clear opening |
| Longueur maximale | 2400 mm maximum leaf height |
| Acier face épaisseur | 0.8-1.0 mm coated steel leaf skins |
| Densité Core | 96-120 kg/m³ mineral wool |
| Conductivité thermique | 0.035-0.045 W/(m·K) typical mineral-wool range |
| surface finie | Pre-coated or powder-coated smooth steel with aluminum edge frame |
| Type joint | Overhead trolley rail with floor guide and EPDM leaf-edge seal |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation |
Options disponibles
Soft-close end dampingFlush vision panelStainless track coverInterlock-ready magnetic lock
Planning a Manual Cleanroom Sliding Door specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
