EnglishCurrent
德语
阿拉伯语
法语
印尼语
日语
韩语
马来语
葡萄牙语
俄语
西班牙语
泰语
土耳其语
越南语
Cleanroom Utility Systems
Laboratory Ultrapure Water System
A compact laboratory polishing and dispensing system for producing Type 1 ultrapure water from suitable pretreated feed water.
- 18.2 MΩ·cm class monitoring
- UV and cartridge polishing
- Ergonomic point-of-use dispenser
Product Introduction
Pretreated water passes through application-selected purification cartridges, UV oxidation and optional ultrafiltration before final resistivity monitoring and controlled dispensing.
Key Features
Online resistivity and temperature display
Optional TOC monitoring
UV oxidation module
Application-specific final filters
Volumetric dispensing options
Customer Product Concerns
Analytical reproducibility depends on matching the polishing train and point-of-use filter to the laboratory workflow.
Ionic contamination affects resultsMonitor product resistivity continuously and replace polishing media according to measured exhaustion.
Organic background interferes with chromatographyUse UV photo-oxidation and an optional TOC monitor for sensitive analytical work.
Microbial contamination at dispensingUse recirculation, scheduled sanitization and the selected point-of-use membrane filter.
Limited bench spaceChoose bench, under-bench or wall-mounted purification with a separate ergonomic dispenser.
Typical Applications
HPLC and LC-MS preparationTrace elemental analysisMolecular biology buffersCell culture mediaGeneral analytical reagent preparation
Technical Parameters
Representative Type 1 performance depends on suitable feed water, installed application cartridges, final filter and operating conditions.
| Core Material | Mixed ion-exchange media, activated carbon, UV reactor and optional ultrafiltration cartridge |
|---|---|
| Panel Thickness | Molded enclosure wall and cartridge dimensions specified in mm by selected configuration |
| Effective Width | Purification unit width typically 260–450 mm |
| Maximum Length | System depth typically up to 600 mm, excluding dispenser reach |
| Steel Facing Thickness | Internal stainless brackets or optional enclosure panels typically 1.0–1.5 mm where used |
| Core Density | Purification-media bulk density varies; mixed resin typically approximately 650–850 kg/m³ |
| Thermal Conductivity | Polymer enclosure materials typically approximately 0.2 W/(m·K) |
| Surface Finish | Smooth cleanable polymer housing with chemically resistant wetted tubing |
| Joint Type | Tool-free cartridge couplings with push-fit or sanitary point-of-use tubing connections |
| Customization | Available based on the intended application and operating environment. |
Available Options
UV oxidationUltrafilterTOC monitorRemote dispenserVolumetric dosing0.22 µm final filterData export and alarm contacts
Planning a Laboratory Ultrapure Water System specification?
Send us your dimensions, installation conditions, performance targets and required surface finish.
