Laboratory ultrapure water system three-quarter view with dispenser

クリーンルームユーティリティシステム

Laboratory の超純水システム

A compact laboratory polishing and dispensing system for producing Type 1 ultrapure water from suitable pretreated feed water.

18.2 MΩ·cm class monitoring
UV and cartridge polishing
Ergonomic point-of-use dispenser

見積もりリクエスト製品案内

商品紹介

Pretreated water passes through application-selected purification cartridges, UV oxidation and optional ultrafiltration before final resistivity monitoring and controlled dispensing.

主要な特徴

Compact bench or wall installation

Online resistivity and temperature display

Optional TOC monitoring

UV oxidation module

Application-specific final filters

Volumetric dispensing options

お客様の製品に関する懸念事項

Analytical reproducibility depends on matching the polishing train and point-of-use filter to the laboratory workflow.

Ionic contamination affects resultsMonitor product resistivity continuously and replace polishing media according to measured exhaustion.

Organic background interferes with chromatographyUse UV photo-oxidation and an optional TOC monitor for sensitive analytical work.

Microbial contamination at dispensingUse recirculation, scheduled sanitization and the selected point-of-use membrane filter.

Limited bench spaceChoose bench, under-bench or wall-mounted purification with a separate ergonomic dispenser.

典型的な用途

HPLC and LC-MS preparationTrace elemental analysisMolecular biology buffersCell culture mediaGeneral analytical reagent preparation

技術的なパラメータ

Representative Type 1 performance depends on suitable feed water, installed application cartridges, final filter and operating conditions.

コア材料	Mixed ion-exchange media, activated carbon, UV reactor and optional ultrafiltration cartridge
パネルの厚さ	Molded enclosure wall and cartridge dimensions specified in mm by selected configuration
有効幅	Purification unit width typically 260–450 mm
最大長さ	System depth typically up to 600 mm, excluding dispenser reach
鋼鉄の厚さを直面する	Internal stainless brackets or optional enclosure panels typically 1.0–1.5 mm where used
コア密度	Purification-media bulk density varies; mixed resin typically approximately 650–850 kg/m³
熱伝導率	Polymer enclosure materials typically approximately 0.2 W/(m·K)
表面仕上げ	Smooth cleanable polymer housing with chemically resistant wetted tubing
ジョイントタイプ	Tool-free cartridge couplings with push-fit or sanitary point-of-use tubing connections
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

UV oxidationUltrafilterTOC monitorRemote dispenserVolumetric dosing0.22 µm final filterData export and alarm contacts

Planning a Laboratory Ultrapure Water System specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する