EnglishCurrent
德语
阿拉伯语
法语
印尼语
日语
韩语
马来语
葡萄牙语
俄语
西班牙语
泰语
土耳其语
越南语
Cleanroom Cleaning, Disinfection and Sterilization
HEPA Cleanroom Vacuum Cleaner
A compact dry-recovery vacuum engineered for controlled environments, combining a smooth cleanable housing, sealed high-efficiency exhaust filtration and cleanroom-suitable tools for removing settled particulate without redistributing it into the room.
- Sealed high-efficiency exhaust filtration
- Smooth cleanable stainless-steel recovery body
- Configurable cleanroom hose and tool set
Product Introduction
The HEPA Cleanroom Vacuum Cleaner is intended for routine particulate recovery around production equipment, benches, floors and hard-to-reach service areas in pharmaceutical, semiconductor, medical-device and precision-assembly facilities. Its stainless-steel recovery canister and white cleanable motor enclosure provide a durable, low-shedding exterior, while a gasketed downstream HEPA stage controls exhaust-borne particles. A long antistatic hose, stainless wand and interchangeable floor, crevice and brush tools allow one mobile unit to cover several cleaning tasks. Filter grade, electrical supply, recovery capacity and accessory configuration can be selected for the intended cleanroom procedure.
Key Features
Smooth stainless-steel and coated surfaces support routine wipe-down cleaning.
Compact wheeled canister moves easily around benches and process equipment.
Sealed disposable collection bag reduces operator contact with recovered dust.
Antistatic hose and cleanroom-compatible tools are available for sensitive areas.
Tool-free access simplifies bag replacement and scheduled filter inspection.
Customer Product Concerns
The system addresses exhaust control, cleanability, contained dust disposal and access around process equipment.
Exhaust air may return captured particles to the room.A gasketed downstream HEPA stage filters motor exhaust, with optional factory leak testing available for defined contamination-control plans.
The vacuum exterior may be difficult to disinfect.Smooth stainless-steel and powder-coated surfaces minimize dirt traps and tolerate common controlled-area wipe-down routines.
Bag changes can expose personnel to collected dust.A closable disposable collection bag can be sealed before removal to reduce dust release.
One floor head cannot reach equipment gaps and overhead ledges.Interchangeable floor, crevice and brush tools extend the vacuum to multiple surface geometries.
Typical Applications
Dry particulate recovery in pharmaceutical and biotechnology cleanroomsCleaning around semiconductor and electronics production toolsMedical-device assembly and packaging areasControlled-environment laboratories and metrology roomsRoutine floor, bench, enclosure and equipment-surface cleaning
Technical Parameters
The following values describe a practical cleanroom vacuum configuration and can be adjusted for the intended recovery task.
| Core Material | Stainless-steel recovery canister with powder-coated steel motor enclosure |
|---|---|
| Panel Thickness | 0.8–1.2 mm enclosure sheet thickness |
| Effective Width | 390 mm nominal body width |
| Maximum Length | 450 mm nominal body length, excluding hose |
| Steel Facing Thickness | 0.8 mm nominal stainless-steel canister wall |
| Core Density | 7900 kg/m³ nominal stainless-steel density |
| Thermal Conductivity | 15 W/(m·K) nominal for stainless-steel body material |
| Surface Finish | Brushed stainless steel and smooth white powder coating |
| Joint Type | Gasketed clamp-fit canister and sealed hose coupling |
| Customization | Available based on the intended application and operating environment. |
Available Options
H13 or H14 HEPA exhaust filterULPA final filter for more demanding particulate-control applicationsAntistatic or conductive hose and accessory kitStainless-steel or white powder-coated outer configurationRegional voltage and plug selectionAlternative collection-bag capacity and tool sets
Planning a HEPA Cleanroom Vacuum Cleaner specification?
Send us your dimensions, installation conditions, performance targets and required surface finish.
