HEPA cleanroom vacuum cleaner in three-quarter full view

クリーンルームの清掃 · 消毒 · 滅菌

HEPA クリーンルームの掃除機

A compact dry-recovery vacuum engineered for controlled environments, combining a smooth cleanable housing, sealed high-efficiency exhaust filtration and cleanroom-suitable tools for removing settled particulate without redistributing it into the room.

Sealed high-efficiency exhaust filtration
Smooth cleanable stainless-steel recovery body
Configurable cleanroom hose and tool set

見積もりリクエスト製品案内

商品紹介

The HEPA Cleanroom Vacuum Cleaner is intended for routine particulate recovery around production equipment, benches, floors and hard-to-reach service areas in pharmaceutical, semiconductor, medical-device and precision-assembly facilities. Its stainless-steel recovery canister and white cleanable motor enclosure provide a durable, low-shedding exterior, while a gasketed downstream HEPA stage controls exhaust-borne particles. A long antistatic hose, stainless wand and interchangeable floor, crevice and brush tools allow one mobile unit to cover several cleaning tasks. Filter grade, electrical supply, recovery capacity and accessory configuration can be selected for the intended cleanroom procedure.

主要な特徴

Downstream HEPA exhaust filtration captures fine particulate before discharge.

Smooth stainless-steel and coated surfaces support routine wipe-down cleaning.

Compact wheeled canister moves easily around benches and process equipment.

Sealed disposable collection bag reduces operator contact with recovered dust.

Antistatic hose and cleanroom-compatible tools are available for sensitive areas.

Tool-free access simplifies bag replacement and scheduled filter inspection.

お客様の製品に関する懸念事項

The system addresses exhaust control, cleanability, contained dust disposal and access around process equipment.

Exhaust air may return captured particles to the room.A gasketed downstream HEPA stage filters motor exhaust, with optional factory leak testing available for defined contamination-control plans.

The vacuum exterior may be difficult to disinfect.Smooth stainless-steel and powder-coated surfaces minimize dirt traps and tolerate common controlled-area wipe-down routines.

Bag changes can expose personnel to collected dust.A closable disposable collection bag can be sealed before removal to reduce dust release.

One floor head cannot reach equipment gaps and overhead ledges.Interchangeable floor, crevice and brush tools extend the vacuum to multiple surface geometries.

典型的な用途

Dry particulate recovery in pharmaceutical and biotechnology cleanroomsCleaning around semiconductor and electronics production toolsMedical-device assembly and packaging areasControlled-environment laboratories and metrology roomsRoutine floor, bench, enclosure and equipment-surface cleaning

技術的なパラメータ

The following values describe a practical cleanroom vacuum configuration and can be adjusted for the intended recovery task.

コア材料	Stainless-steel recovery canister with powder-coated steel motor enclosure
パネルの厚さ	0.8–1.2 mm enclosure sheet thickness
有効幅	390 mm nominal body width
最大長さ	450 mm nominal body length, excluding hose
鋼鉄の厚さを直面する	0.8 mm nominal stainless-steel canister wall
コア密度	7900 kg / m3 公称ステンレス鋼密度
熱伝導率	15 W / （ m · K ）ステンレス製ボディ材料の公称
表面仕上げ	Brushed stainless steel and smooth white powder coating
ジョイントタイプ	Gasketed clamp-fit canister and sealed hose coupling
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

H13 or H14 HEPA exhaust filterULPA final filter for more demanding particulate-control applicationsAntistatic or conductive hose and accessory kitStainless-steel or white powder-coated outer configurationRegional voltage and plug selectionAlternative collection-bag capacity and tool sets

Planning a HEPA Cleanroom Vacuum Cleaner specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する