HEPA cleanroom vacuum cleaner in three-quarter full view

클린룸 청소, 소독 및 소독

HEPA 클린룸 진공 청소기

A compact dry-recovery vacuum engineered for controlled environments, combining a smooth cleanable housing, sealed high-efficiency exhaust filtration and cleanroom-suitable tools for removing settled particulate without redistributing it into the room.

Sealed high-efficiency exhaust filtration
Smooth cleanable stainless-steel recovery body
Configurable cleanroom hose and tool set

견적 요청 제품 찾아보기

상품 소개

The HEPA Cleanroom Vacuum Cleaner is intended for routine particulate recovery around production equipment, benches, floors and hard-to-reach service areas in pharmaceutical, semiconductor, medical-device and precision-assembly facilities. Its stainless-steel recovery canister and white cleanable motor enclosure provide a durable, low-shedding exterior, while a gasketed downstream HEPA stage controls exhaust-borne particles. A long antistatic hose, stainless wand and interchangeable floor, crevice and brush tools allow one mobile unit to cover several cleaning tasks. Filter grade, electrical supply, recovery capacity and accessory configuration can be selected for the intended cleanroom procedure.

주요 기능

Downstream HEPA exhaust filtration captures fine particulate before discharge.

Smooth stainless-steel and coated surfaces support routine wipe-down cleaning.

Compact wheeled canister moves easily around benches and process equipment.

Sealed disposable collection bag reduces operator contact with recovered dust.

Antistatic hose and cleanroom-compatible tools are available for sensitive areas.

Tool-free access simplifies bag replacement and scheduled filter inspection.

고객 제품 관심사

The system addresses exhaust control, cleanability, contained dust disposal and access around process equipment.

Exhaust air may return captured particles to the room.A gasketed downstream HEPA stage filters motor exhaust, with optional factory leak testing available for defined contamination-control plans.

The vacuum exterior may be difficult to disinfect.Smooth stainless-steel and powder-coated surfaces minimize dirt traps and tolerate common controlled-area wipe-down routines.

Bag changes can expose personnel to collected dust.A closable disposable collection bag can be sealed before removal to reduce dust release.

One floor head cannot reach equipment gaps and overhead ledges.Interchangeable floor, crevice and brush tools extend the vacuum to multiple surface geometries.

일반적인 응용 프로그램

Dry particulate recovery in pharmaceutical and biotechnology cleanroomsCleaning around semiconductor and electronics production toolsMedical-device assembly and packaging areasControlled-environment laboratories and metrology roomsRoutine floor, bench, enclosure and equipment-surface cleaning

기술 매개변수

The following values describe a practical cleanroom vacuum configuration and can be adjusted for the intended recovery task.

핵심 재료	Stainless-steel recovery canister with powder-coated steel motor enclosure
패널 두께	0.8–1.2 mm enclosure sheet thickness
유효 폭	390 mm nominal body width
최대 길이	450 mm nominal body length, excluding hose
강철 면면 두께	0.8 mm nominal stainless-steel canister wall
코어 밀도	7900 kg / m 3 명칭 스테인레스 강철 밀도
열전도도 (Thermal Conductivity)	스테인레스 스틸 바디 소재용 15 W / (m · K) 명칭
표면 마무리	Brushed stainless steel and smooth white powder coating
접합 유형	Gasketed clamp-fit canister and sealed hose coupling
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

H13 or H14 HEPA exhaust filterULPA final filter for more demanding particulate-control applicationsAntistatic or conductive hose and accessory kitStainless-steel or white powder-coated outer configurationRegional voltage and plug selectionAlternative collection-bag capacity and tool sets

Planning a HEPA Cleanroom Vacuum Cleaner specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.