Cleanroom Drainage, Hygiene and Safety Equipment

Fire Alarm Horn and Strobe

A combined audible and visual notification appliance for clear fire-alarm recognition in noisy or PPE-controlled areas.

Audible and Visual Warning
Synchronized Strobe Output
Selectable Sound Level
Low-Profile Cleanable Housing

Request a Quote Browse Products

Product Introduction

The horn/strobe combines an electronic audible transducer and high-intensity flashing indicator in one wall-mounted enclosure. Selectable tone and output settings support the room acoustic design, while synchronized flash control reduces confusing visual patterns across a suite. A smooth faceplate and gasketed mounting interface suit clean corridors and controlled rooms.

Key Features

One appliance provides coordinated audible and visual notification.

Selectable output supports different room background-noise levels.

Synchronization modules align multiple visible strobes.

A removable face on a wired base simplifies service.

Customer Product Concerns

Personnel wearing PPE or working near machinery may not perceive a single alarm mode consistently.

High background noise masks an audible alarm.A high-output horn and visual strobe provide two notification modes.

Unsynchronized strobes create distracting flash patterns.Compatible synchronization control aligns appliances on the circuit.

Excessive sound creates discomfort in small rooms.Selectable tone and output taps match the room acoustic requirement.

Rough wall boxes collect dust around the appliance.A gasketed low-profile backplate closes the visible mounting interface.

Typical Applications

Cleanroom corridorsGowning suitesLaboratory areasControlled production rooms

Technical Parameters

Typical enclosure values are shown below; candela, sound output and circuit compatibility are selected by the fire-alarm design.

Core Material	Flame-retardant polymer face with steel mounting plate and electronic sounder
Panel Thickness	2.0-3.0 mm molded housing
Effective Width	100-180 mm
Maximum Length	Up to 220 mm faceplate height
Steel Facing Thickness	0.8-1.2 mm internal steel mounting plate
Core Density	1200-1450 kg/m³ for polymer housing
Thermal Conductivity	0.18-0.30 W/(m·K) for polymer housing
Surface Finish	Smooth red or white cleanable faceplate with clear lens
Joint Type	Snap or screw-fixed face on gasketed wired mounting base
Customization	Available based on the intended application and operating environment.

Available Options

Red or white housingWall or ceiling mountSelectable strobe intensityMultiple horn tones

Planning a Fire Alarm Horn and Strobe specification?

Send us your dimensions, installation conditions, performance targets and required surface finish.

Talk to Our Team