Complete fire alarm horn and strobe in three-quarter view

클린룸 배수, 위생 및 안전 장비

화재 경보 horn 및 strobe

A combined audible and visual notification appliance for clear fire-alarm recognition in noisy or PPE-controlled areas.

Audible and Visual Warning
Synchronized Strobe Output
Selectable Sound Level
Low-Profile Cleanable Housing

견적 요청 제품 찾아보기

상품 소개

The horn/strobe combines an electronic audible transducer and high-intensity flashing indicator in one wall-mounted enclosure. Selectable tone and output settings support the room acoustic design, while synchronized flash control reduces confusing visual patterns across a suite. A smooth faceplate and gasketed mounting interface suit clean corridors and controlled rooms.

주요 기능

One appliance provides coordinated audible and visual notification.

Selectable output supports different room background-noise levels.

Synchronization modules align multiple visible strobes.

A removable face on a wired base simplifies service.

고객 제품 관심사

Personnel wearing PPE or working near machinery may not perceive a single alarm mode consistently.

High background noise masks an audible alarm.A high-output horn and visual strobe provide two notification modes.

Unsynchronized strobes create distracting flash patterns.Compatible synchronization control aligns appliances on the circuit.

Excessive sound creates discomfort in small rooms.Selectable tone and output taps match the room acoustic requirement.

Rough wall boxes collect dust around the appliance.A gasketed low-profile backplate closes the visible mounting interface.

일반적인 응용 프로그램

클린 룸 복도Gowning suitesLaboratory areasControlled production rooms

기술 매개변수

Typical enclosure values are shown below; candela, sound output and circuit compatibility are selected by the fire-alarm design.

핵심 재료	Flame-retardant polymer face with steel mounting plate and electronic sounder
패널 두께	2.0-3.0 mm molded housing
유효 폭	100-180 mm
최대 길이	Up to 220 mm faceplate height
강철 면면 두께	0.8-1.2 mm internal steel mounting plate
코어 밀도	1200-1450 kg/m³ for polymer housing
열전도도 (Thermal Conductivity)	0.18-0.30 W/(m·K) for polymer housing
표면 마무리	Smooth red or white cleanable faceplate with clear lens
접합 유형	Snap or screw-fixed face on gasketed wired mounting base
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Red or white housingWall or ceiling mountSelectable strobe intensityMultiple horn tones

Planning a Fire Alarm Horn and Strobe specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.