İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Drenajı, Hijyen ve Güvenlik Ekipmanları
Yangın Alarmı Horn ve Strobe
A combined audible and visual notification appliance for clear fire-alarm recognition in noisy or PPE-controlled areas.
- Audible and Visual Warning
- Synchronized Strobe Output
- Selectable Sound Level
- Low-Profile Cleanable Housing
Ürün tanıtımı
The horn/strobe combines an electronic audible transducer and high-intensity flashing indicator in one wall-mounted enclosure. Selectable tone and output settings support the room acoustic design, while synchronized flash control reduces confusing visual patterns across a suite. A smooth faceplate and gasketed mounting interface suit clean corridors and controlled rooms.
Ana Özellikler
Selectable output supports different room background-noise levels.
Synchronization modules align multiple visible strobes.
A removable face on a wired base simplifies service.
Müşteri Ürün Sorunları
Personnel wearing PPE or working near machinery may not perceive a single alarm mode consistently.
High background noise masks an audible alarm.A high-output horn and visual strobe provide two notification modes.
Unsynchronized strobes create distracting flash patterns.Compatible synchronization control aligns appliances on the circuit.
Excessive sound creates discomfort in small rooms.Selectable tone and output taps match the room acoustic requirement.
Rough wall boxes collect dust around the appliance.A gasketed low-profile backplate closes the visible mounting interface.
Tipik uygulamalar
Cleanroom corridorsGowning suitesLaboratory areasControlled production rooms
Teknik parametreler
Typical enclosure values are shown below; candela, sound output and circuit compatibility are selected by the fire-alarm design.
| Temel malzemeler | Flame-retardant polymer face with steel mounting plate and electronic sounder |
|---|---|
| Panel kalınlığı | 2.0-3.0 mm molded housing |
| Effective Width (Etkili Genişlik) | 100-180 mm |
| Maksimum uzunluk | Up to 220 mm faceplate height |
| Çelik yüz yüze kalınlığı | 0.8-1.2 mm internal steel mounting plate |
| Core Density (Çekirdek Yoğunluğu) | 1200-1450 kg/m³ for polymer housing |
| Termal İletkenlik | 0.18-0.30 W/(m·K) for polymer housing |
| Yüzey bitirme | Smooth red or white cleanable faceplate with clear lens |
| Ortak tip | Snap or screw-fixed face on gasketed wired mounting base |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Red or white housingWall or ceiling mountSelectable strobe intensityMultiple horn tones
Planning a Fire Alarm Horn and Strobe specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
