Cleanroom Drainage, Hygiene and Safety Equipment

Emergency Eyewash Station

A plumbed twin-nozzle eyewash with a stay-open valve and high-visibility activation for immediate ocular flushing.

Twin Controlled Flushing Streams
Single-Motion Stay-Open Valve
Protected Nozzle Heads
Visible Safety-Green Activation

Request a Quote Browse Products

Product Introduction

The emergency eyewash station supplies two controlled flushing streams from protected heads positioned above a stainless or chemical-resistant receptor. A large push flag opens a stay-open valve so the user can hold both eyelids without maintaining pressure on the control. The inlet strainer and flow controls stabilize nozzle output, while an open pedestal layout keeps the station visible and accessible near chemical handling areas.

Key Features

Twin dust-covered nozzles direct balanced flushing streams toward both eyes.

A large safety-green push flag opens a stay-open ball valve in one motion.

An inline strainer and integral flow controls reduce debris and pressure variation at the heads.

Stainless bowl, drain tailpiece and corrosion-resistant fittings support wet-area cleaning.

Customer Product Concerns

An exposed worker needs immediate, intuitive flushing with both hands free to hold the eyes open and no obstruction around the station.

Small or ambiguous controls delay activation during an exposure event.A large colored push flag gives an obvious single-motion control point.

The user cannot keep holding a valve while opening both eyelids.The stay-open valve continues flow until it is deliberately returned to the closed position.

Sediment and variable supply pressure can distort the flushing pattern.A line strainer and matched flow controls stabilize discharge at both heads.

Idle nozzles collect dust in controlled and industrial environments.Self-opening dust covers shield the outlets and release automatically when flow starts.

Typical Applications

Cleanroom chemical preparationLaboratory wet benchesBattery and utility roomsProcess chemical dispensing areas

Technical Parameters

Typical construction values for a plumbed pedestal emergency eyewash are shown below; supply temperature and flow capacity are selected for the facility emergency-water design.

Core Material	304 stainless receptor and pipework with chrome-plated brass valve components
Panel Thickness	1.0-1.5 mm stainless receptor bowl
Effective Width	280-400 mm receptor diameter
Maximum Length	Up to 1200 mm overall station height
Steel Facing Thickness	1.0-1.5 mm stainless bowl and signage support
Core Density	7900-8000 kg/m³ for stainless structural parts
Thermal Conductivity	14-16 W/(m·K) for stainless components
Surface Finish	Bright or satin stainless with safety-green polymer controls
Joint Type	Threaded plumbed inlet and drain with stay-open ball valve and replaceable nozzle assemblies
Customization	Available based on the intended application and operating environment.

Available Options

Stainless or safety-green receptorPedestal or wall installationLocal alarm flow switchTempered-water mixing assembly

Planning a Emergency Eyewash Station specification?

Send us your dimensions, installation conditions, performance targets and required surface finish.

Talk to Our Team