English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات الصرف الصحي والنظافة والسلامة في الغرف النظيفة
Eمحطة غسل العيون
A plumbed twin-nozzle eyewash with a stay-open valve and high-visibility activation for immediate ocular flushing.
- Twin Controlled Flushing Streams
- Single-Motion Stay-Open Valve
- Protected Nozzle Heads
- Visible Safety-Green Activation
مقدمة المنتج
The emergency eyewash station supplies two controlled flushing streams from protected heads positioned above a stainless or chemical-resistant receptor. A large push flag opens a stay-open valve so the user can hold both eyelids without maintaining pressure on the control. The inlet strainer and flow controls stabilize nozzle output, while an open pedestal layout keeps the station visible and accessible near chemical handling areas.
الخصائص الرئيسية
A large safety-green push flag opens a stay-open ball valve in one motion.
An inline strainer and integral flow controls reduce debris and pressure variation at the heads.
Stainless bowl, drain tailpiece and corrosion-resistant fittings support wet-area cleaning.
مخاوف المنتج للعملاء
An exposed worker needs immediate, intuitive flushing with both hands free to hold the eyes open and no obstruction around the station.
Small or ambiguous controls delay activation during an exposure event.A large colored push flag gives an obvious single-motion control point.
The user cannot keep holding a valve while opening both eyelids.The stay-open valve continues flow until it is deliberately returned to the closed position.
Sediment and variable supply pressure can distort the flushing pattern.A line strainer and matched flow controls stabilize discharge at both heads.
Idle nozzles collect dust in controlled and industrial environments.Self-opening dust covers shield the outlets and release automatically when flow starts.
تطبيقات نموذجية
Cleanroom chemical preparationLaboratory wet benchesBattery and utility roomsProcess chemical dispensing areas
المعلمات الفنية
Typical construction values for a plumbed pedestal emergency eyewash are shown below; supply temperature and flow capacity are selected for the facility emergency-water design.
| المواد الأساسية | 304 stainless receptor and pipework with chrome-plated brass valve components |
|---|---|
| سمك اللوحة | 1.0-1.5 mm stainless receptor bowl |
| العرض الفعال | 280-400 mm receptor diameter |
| الحد الأقصى الطول | Up to 1200 mm overall station height |
| الصلب يواجه سمك | 1.0-1.5 mm stainless bowl and signage support |
| الكثافة الأساسية | 7900-8000 kg/m³ for stainless structural parts |
| الموصلية الحرارية | 14-16 W/(m·K) for stainless components |
| إنهاء السطح | Bright or satin stainless with safety-green polymer controls |
| نوع المشترك | Threaded plumbed inlet and drain with stay-open ball valve and replaceable nozzle assemblies |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Stainless or safety-green receptorPedestal or wall installationLocal alarm flow switchTempered-water mixing assembly
Planning a Emergency Eyewash Station specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
