Complete emergency eyewash station in three-quarter view with twin protected nozzles and stainless bowl

클린룸 배수, 위생 및 안전 장비

응급 눈 씻기 스테이션

A plumbed twin-nozzle eyewash with a stay-open valve and high-visibility activation for immediate ocular flushing.

Twin Controlled Flushing Streams
Single-Motion Stay-Open Valve
Protected Nozzle Heads
Visible Safety-Green Activation

견적 요청 제품 찾아보기

상품 소개

The emergency eyewash station supplies two controlled flushing streams from protected heads positioned above a stainless or chemical-resistant receptor. A large push flag opens a stay-open valve so the user can hold both eyelids without maintaining pressure on the control. The inlet strainer and flow controls stabilize nozzle output, while an open pedestal layout keeps the station visible and accessible near chemical handling areas.

주요 기능

Twin dust-covered nozzles direct balanced flushing streams toward both eyes.

A large safety-green push flag opens a stay-open ball valve in one motion.

An inline strainer and integral flow controls reduce debris and pressure variation at the heads.

Stainless bowl, drain tailpiece and corrosion-resistant fittings support wet-area cleaning.

고객 제품 관심사

An exposed worker needs immediate, intuitive flushing with both hands free to hold the eyes open and no obstruction around the station.

Small or ambiguous controls delay activation during an exposure event.A large colored push flag gives an obvious single-motion control point.

The user cannot keep holding a valve while opening both eyelids.The stay-open valve continues flow until it is deliberately returned to the closed position.

Sediment and variable supply pressure can distort the flushing pattern.A line strainer and matched flow controls stabilize discharge at both heads.

Idle nozzles collect dust in controlled and industrial environments.Self-opening dust covers shield the outlets and release automatically when flow starts.

일반적인 응용 프로그램

Cleanroom chemical preparationLaboratory wet benchesBattery and utility roomsProcess chemical dispensing areas

기술 매개변수

Typical construction values for a plumbed pedestal emergency eyewash are shown below; supply temperature and flow capacity are selected for the facility emergency-water design.

핵심 재료	304 stainless receptor and pipework with chrome-plated brass valve components
패널 두께	1.0-1.5 mm stainless receptor bowl
유효 폭	280-400 mm receptor diameter
최대 길이	Up to 1200 mm overall station height
강철 면면 두께	1.0-1.5 mm stainless bowl and signage support
코어 밀도	7900-8000 kg/m³ for stainless structural parts
열전도도 (Thermal Conductivity)	14-16 W/(m·K) for stainless components
표면 마무리	Bright or satin stainless with safety-green polymer controls
접합 유형	Threaded plumbed inlet and drain with stay-open ball valve and replaceable nozzle assemblies
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Stainless or safety-green receptorPedestal or wall installationLocal alarm flow switchTempered-water mixing assembly

Planning a Emergency Eyewash Station specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.