Cleanroom Furniture and Stainless Steel Products

Cleanroom Packing Table

An organized cleanroom packing station with dedicated positions for bags, labels, sealing tools and finished product flow.

Dedicated packaging dispensers
Clear in-process product zone
Integrated sealer shelf
Separated label and waste storage

Request a Quote Browse Products

Product Introduction

The cleanroom packing table arranges primary bags, labels and sealing equipment around a central stainless work surface. Raised dispensers present packaging without stacking loose materials on the bench, and an enclosed service rail supplies power to heat sealers or label printers. Finished packs can move to a side shelf or roller section without crossing incoming components. Smooth removable guides permit format changes and complete wipe-down.

Key Features

Overhead reel and bag dispensers keep packaging media off the active product surface.

A protected electrical rail supports sealers and printers without loose extension cords.

Removable guides define incoming, packing and completed-product zones for repeatable flow.

A side-mounted waste aperture directs trim away from the product without an open bin under the operator.

Customer Product Concerns

Packing quality falls when labels, bags, tools and waste share one unstructured clean surface.

Bag stock is stacked directly beside exposed product.Dedicated dispensers present one package at a time above the primary work zone.

Sealer cables and foot controls cross the operator path.Integrated power routing and defined controller mounts keep utilities below or behind the work area.

Labels from different orders are mixed at the station.Separated labelled bins and a printer shelf isolate each active packaging batch.

Cutoff strips collect beneath the worktop and re-enter the process.A closed side waste chute captures trim in a removable cleanable container.

Typical Applications

Medical-device final packagingPharmaceutical kit packingSterile barrier preparationOptics baggingClean component labelling

Technical Parameters

Typical configurable specifications for a cleanroom packing table are listed below.

Core Material	Solid Type 304 stainless steel worktop with sealed tubular frame and polymer dispenser rollers
Panel Thickness	1.2–1.5 mm stainless worktop with reinforced underside
Effective Width	750–900 mm packing surface depth
Maximum Length	2400 mm
Steel Facing Thickness	1.2–1.5 mm Type 304 stainless steel
Core Density	7900–8000 kg/m³ solid stainless components
Thermal Conductivity	14–16 W/(m·K) for stainless work surface
Surface Finish	Brushed stainless steel with rounded edges and cleanable removable guides
Joint Type	Welded base with modular clamped dispenser and service-rail attachments
Customization	Available based on the intended application and operating environment.

Available Options

Bag and label dispensersHeat-sealer shelf and foot-control mountIntegrated task lightingRoller or slide-out finished-pack shelf

Planning a Cleanroom Packing Table specification?

Send us your dimensions, installation conditions, performance targets and required surface finish.

Talk to Our Team