English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أثاث الغرف النظيفة ومنتجات الفولاذ المقاوم للصدأ
Cleanroom التعبئة الجدول
An organized cleanroom packing station with dedicated positions for bags, labels, sealing tools and finished product flow.
- Dedicated packaging dispensers
- Clear in-process product zone
- Integrated sealer shelf
- Separated label and waste storage
مقدمة المنتج
The cleanroom packing table arranges primary bags, labels and sealing equipment around a central stainless work surface. Raised dispensers present packaging without stacking loose materials on the bench, and an enclosed service rail supplies power to heat sealers or label printers. Finished packs can move to a side shelf or roller section without crossing incoming components. Smooth removable guides permit format changes and complete wipe-down.
الخصائص الرئيسية
A protected electrical rail supports sealers and printers without loose extension cords.
Removable guides define incoming, packing and completed-product zones for repeatable flow.
A side-mounted waste aperture directs trim away from the product without an open bin under the operator.
مخاوف المنتج للعملاء
Packing quality falls when labels, bags, tools and waste share one unstructured clean surface.
Bag stock is stacked directly beside exposed product.Dedicated dispensers present one package at a time above the primary work zone.
Sealer cables and foot controls cross the operator path.Integrated power routing and defined controller mounts keep utilities below or behind the work area.
Labels from different orders are mixed at the station.Separated labelled bins and a printer shelf isolate each active packaging batch.
Cutoff strips collect beneath the worktop and re-enter the process.A closed side waste chute captures trim in a removable cleanable container.
تطبيقات نموذجية
Medical-device final packagingPharmaceutical kit packingSterile barrier preparationOptics baggingClean component labelling
المعلمات الفنية
Typical configurable specifications for a cleanroom packing table are listed below.
| المواد الأساسية | Solid Type 304 stainless steel worktop with sealed tubular frame and polymer dispenser rollers |
|---|---|
| سمك اللوحة | 1.2–1.5 mm stainless worktop with reinforced underside |
| العرض الفعال | 750–900 mm packing surface depth |
| الحد الأقصى الطول | 2400 mm |
| الصلب يواجه سمك | 1.2–1.5 mm Type 304 stainless steel |
| الكثافة الأساسية | 7900–8000 kg/m³ solid stainless components |
| الموصلية الحرارية | 14–16 W/(m·K) for stainless work surface |
| إنهاء السطح | Brushed stainless steel with rounded edges and cleanable removable guides |
| نوع المشترك | Welded base with modular clamped dispenser and service-rail attachments |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Bag and label dispensersHeat-sealer shelf and foot-control mountIntegrated task lightingRoller or slide-out finished-pack shelf
Planning a Cleanroom Packing Table specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
