Cleanroom packing table with stainless top and organized dispensers

클린룸 가구 및 스테인레스 스틸 제품

클린룸 포장 테이블

An organized cleanroom packing station with dedicated positions for bags, labels, sealing tools and finished product flow.

Dedicated packaging dispensers
Clear in-process product zone
Integrated sealer shelf
Separated label and waste storage

견적 요청 제품 찾아보기

상품 소개

The cleanroom packing table arranges primary bags, labels and sealing equipment around a central stainless work surface. Raised dispensers present packaging without stacking loose materials on the bench, and an enclosed service rail supplies power to heat sealers or label printers. Finished packs can move to a side shelf or roller section without crossing incoming components. Smooth removable guides permit format changes and complete wipe-down.

주요 기능

Overhead reel and bag dispensers keep packaging media off the active product surface.

A protected electrical rail supports sealers and printers without loose extension cords.

Removable guides define incoming, packing and completed-product zones for repeatable flow.

A side-mounted waste aperture directs trim away from the product without an open bin under the operator.

고객 제품 관심사

Packing quality falls when labels, bags, tools and waste share one unstructured clean surface.

Bag stock is stacked directly beside exposed product.Dedicated dispensers present one package at a time above the primary work zone.

Sealer cables and foot controls cross the operator path.Integrated power routing and defined controller mounts keep utilities below or behind the work area.

Labels from different orders are mixed at the station.Separated labelled bins and a printer shelf isolate each active packaging batch.

Cutoff strips collect beneath the worktop and re-enter the process.A closed side waste chute captures trim in a removable cleanable container.

일반적인 응용 프로그램

Medical-device final packagingPharmaceutical kit packingSterile barrier preparationOptics baggingClean component labelling

기술 매개변수

Typical configurable specifications for a cleanroom packing table are listed below.

핵심 재료	Solid Type 304 stainless steel worktop with sealed tubular frame and polymer dispenser rollers
패널 두께	1.2–1.5 mm stainless worktop with reinforced underside
유효 폭	750–900 mm packing surface depth
최대 길이	2400 mm
강철 면면 두께	1.2–1.5 mm Type 304 stainless steel
코어 밀도	7900–8000 kg/m³ solid stainless components
열전도도 (Thermal Conductivity)	14–16 W/(m·K) for stainless work surface
표면 마무리	Brushed stainless steel with rounded edges and cleanable removable guides
접합 유형	Welded base with modular clamped dispenser and service-rail attachments
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Bag and label dispensersHeat-sealer shelf and foot-control mountIntegrated task lightingRoller or slide-out finished-pack shelf

Planning a Cleanroom Packing Table specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.