Cleanroom Garments, PPE and Consumables

Cleanroom Frock

A body-length cleanroom frock with controlled neck, wrist and front closures for convenient upper-body contamination coverage.

Extended frock length for upper-body and upper-leg coverage
Controlled collar and wrist interfaces
Convenient snap or concealed-zipper gowning

Request a Quote Browse Products

Product Introduction

The Cleanroom Frock is a long jacket-style garment designed for controlled areas where full coverall coverage is not required. Its extended body panel covers the torso and upper legs, while a stand or bound collar, enclosed seams and close-fitting wrists limit exposed garment interfaces. Front snaps or a concealed zipper support routine gowning and removal.

Key Features

Extended frock length provides more coverage than a standard jacket

Bound or stand collar reduces exposed neckline gaps

Elasticated wrists form a practical interface with cleanroom gloves

Front snap or concealed zipper closure simplifies gowning

Generous shoulder and sleeve pattern supports reaching and bench work

Customer Product Concerns

A frock must provide enough body length and secure neckline and wrist interfaces without imposing the full coverage of a coverall. Its suitability depends on the controlled area's gowning level, the operator's movement and the clothing that remains underneath.

A short jacket may expose street clothing around the waist and upper legs.Use an extended body length selected to match the required coverage zone.

Open necklines and loose cuffs can create uncontrolled interface gaps.Configure a bound or stand collar and elasticated wrists compatible with the glove protocol.

Exposed buttons or coarse seams may trap particles and complicate wiping.Choose enclosed seams and low-profile snaps or a covered zipper to reduce exposed traps.

Excessively heavy or narrow garments can restrict routine bench work.Match fabric weight and garment ease to shift duration, movement and processing method.

Typical Applications

Appropriate for laboratories, pharmaceutical support rooms, medical-device assembly, electronics inspection, clean packing, controlled warehouses and visitor gowning programs where local procedures permit frock-style coverage.

Technical Parameters

The ranges below apply to body-length reusable polyester or cleanroom-compatible nonwoven frocks. Final length, panel width, collar, front fastening and cuff design should be coordinated with the required coverage and changing routine.

Core Material	Continuous-filament polyester fabric or cleanroom-compatible nonwoven material
Panel Thickness	0.18–0.40 mm
Effective Width	520–800 mm per laid-flat body panel
Maximum Length	1200 mm
Steel Facing Thickness	0 mm; no steel facing used
Core Density	65–125 kg/m³ apparent fabric bulk density
Thermal Conductivity	0.035–0.060 W/(m·K), material dependent
Surface Finish	Smooth low-lint surface with bound or enclosed seam edges
Joint Type	Sewn cleanroom seams with front snap or concealed zipper closure
Customization	Available based on the intended application and operating environment.

Available Options

Reusable polyester or disposable nonwoven materialBound neck, stand collar or adjustable mandarin collarFront snap or concealed zipper closureElasticated or knitted wrist cuffsWhite, light blue or other standard cleanroom colorsIndividual packaging and size identification

Planning a Cleanroom Frock specification?

Send us your dimensions, installation conditions, performance targets and required surface finish.

Talk to Our Team