English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
ملابس الغرف النظيفة، PPE والمواد الاستهلاكية
غرفة نظيفة ثوب
A body-length cleanroom frock with controlled neck, wrist and front closures for convenient upper-body contamination coverage.
- Extended frock length for upper-body and upper-leg coverage
- Controlled collar and wrist interfaces
- Convenient snap or concealed-zipper gowning
مقدمة المنتج
The Cleanroom Frock is a long jacket-style garment designed for controlled areas where full coverall coverage is not required. Its extended body panel covers the torso and upper legs, while a stand or bound collar, enclosed seams and close-fitting wrists limit exposed garment interfaces. Front snaps or a concealed zipper support routine gowning and removal.
الخصائص الرئيسية
Bound or stand collar reduces exposed neckline gaps
Elasticated wrists form a practical interface with cleanroom gloves
Front snap or concealed zipper closure simplifies gowning
Generous shoulder and sleeve pattern supports reaching and bench work
مخاوف المنتج للعملاء
A frock must provide enough body length and secure neckline and wrist interfaces without imposing the full coverage of a coverall. Its suitability depends on the controlled area's gowning level, the operator's movement and the clothing that remains underneath.
A short jacket may expose street clothing around the waist and upper legs.Use an extended body length selected to match the required coverage zone.
Open necklines and loose cuffs can create uncontrolled interface gaps.Configure a bound or stand collar and elasticated wrists compatible with the glove protocol.
Exposed buttons or coarse seams may trap particles and complicate wiping.Choose enclosed seams and low-profile snaps or a covered zipper to reduce exposed traps.
Excessively heavy or narrow garments can restrict routine bench work.Match fabric weight and garment ease to shift duration, movement and processing method.
تطبيقات نموذجية
Appropriate for laboratories, pharmaceutical support rooms, medical-device assembly, electronics inspection, clean packing, controlled warehouses and visitor gowning programs where local procedures permit frock-style coverage.
المعلمات الفنية
The ranges below apply to body-length reusable polyester or cleanroom-compatible nonwoven frocks. Final length, panel width, collar, front fastening and cuff design should be coordinated with the required coverage and changing routine.
| المواد الأساسية | Continuous-filament polyester fabric or cleanroom-compatible nonwoven material |
|---|---|
| سمك اللوحة | 0.18–0.40 mm |
| العرض الفعال | 520–800 mm per laid-flat body panel |
| الحد الأقصى الطول | 1200 mm |
| الصلب يواجه سمك | 0 mm; no steel facing used |
| الكثافة الأساسية | 65–125 kg/m³ apparent fabric bulk density |
| الموصلية الحرارية | 0.035–0.060 W/(m·K), material dependent |
| إنهاء السطح | Smooth low-lint surface with bound or enclosed seam edges |
| نوع المشترك | Sewn cleanroom seams with front snap or concealed zipper closure |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Reusable polyester or disposable nonwoven materialBound neck, stand collar or adjustable mandarin collarFront snap or concealed zipper closureElasticated or knitted wrist cuffsWhite, light blue or other standard cleanroom colorsIndividual packaging and size identification
Planning a Cleanroom Frock specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
