English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Одежда для чистых комнат, ИПП и расходные материалы
Cleanroom Frock
A body-length cleanroom frock with controlled neck, wrist and front closures for convenient upper-body contamination coverage.
- Extended frock length for upper-body and upper-leg coverage
- Controlled collar and wrist interfaces
- Convenient snap or concealed-zipper gowning
Введение продукции
The Cleanroom Frock is a long jacket-style garment designed for controlled areas where full coverall coverage is not required. Its extended body panel covers the torso and upper legs, while a stand or bound collar, enclosed seams and close-fitting wrists limit exposed garment interfaces. Front snaps or a concealed zipper support routine gowning and removal.
Основные характеристики
Bound or stand collar reduces exposed neckline gaps
Elasticated wrists form a practical interface with cleanroom gloves
Front snap or concealed zipper closure simplifies gowning
Generous shoulder and sleeve pattern supports reaching and bench work
Обеспокоенность клиентов продуктами
A frock must provide enough body length and secure neckline and wrist interfaces without imposing the full coverage of a coverall. Its suitability depends on the controlled area's gowning level, the operator's movement and the clothing that remains underneath.
A short jacket may expose street clothing around the waist and upper legs.Use an extended body length selected to match the required coverage zone.
Open necklines and loose cuffs can create uncontrolled interface gaps.Configure a bound or stand collar and elasticated wrists compatible with the glove protocol.
Exposed buttons or coarse seams may trap particles and complicate wiping.Choose enclosed seams and low-profile snaps or a covered zipper to reduce exposed traps.
Excessively heavy or narrow garments can restrict routine bench work.Match fabric weight and garment ease to shift duration, movement and processing method.
Типичные приложения
Appropriate for laboratories, pharmaceutical support rooms, medical-device assembly, electronics inspection, clean packing, controlled warehouses and visitor gowning programs where local procedures permit frock-style coverage.
Технические параметры
The ranges below apply to body-length reusable polyester or cleanroom-compatible nonwoven frocks. Final length, panel width, collar, front fastening and cuff design should be coordinated with the required coverage and changing routine.
| Основной материал | Continuous-filament polyester fabric or cleanroom-compatible nonwoven material |
|---|---|
| Толщина панели | 0.18–0.40 mm |
| эффективная ширина | 520–800 mm per laid-flat body panel |
| Максимальная длина | 1200 mm |
| Толщина линий стали | 0 mm; no steel facing used |
| Плотность ядра | 65–125 kg/m³ apparent fabric bulk density |
| Теплопроводимость | 0.035–0.060 W/(m·K), material dependent |
| Поверхностная отделка | Smooth low-lint surface with bound or enclosed seam edges |
| Объединенный тип | Sewn cleanroom seams with front snap or concealed zipper closure |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Reusable polyester or disposable nonwoven materialBound neck, stand collar or adjustable mandarin collarFront snap or concealed zipper closureElasticated or knitted wrist cuffsWhite, light blue or other standard cleanroom colorsIndividual packaging and size identification
Planning a Cleanroom Frock specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
