EnglishCurrent
德语
阿拉伯语
法语
印尼语
日语
韩语
马来语
葡萄牙语
俄语
西班牙语
泰语
土耳其语
越南语
Cleanroom Garments, PPE and Consumables
Bouffant Cap
A lightweight disposable bouffant cap with a gathered polypropylene crown and elastic edge for practical hair containment.
- Full hair containment with a gathered crown
- Soft latex-free elastic opening
- Lightweight spunbond polypropylene
Product Introduction
The Bouffant Cap expands into a roomy pleated crown that accommodates different hair volumes while its continuous elastic edge sits around the hairline. Spunbond polypropylene provides a light, breathable disposable layer for controlled support areas, laboratories, food handling and general manufacturing. Compact folding enables efficient dispensing without rigid components.
Key Features
Continuous elastic edge supports an even fit around the hairline
Lightweight nonwoven construction reduces bulk under additional headwear
Available in common diameters for different hair volume
Color options support zone or visitor identification
Customer Product Concerns
A bouffant cap must contain the complete hairline without excessive elastic pressure. Selecting a diameter that is too small can cause slippage, while an oversized cap may sag near the work area.
Hair can escape around the temples or nape.Don the elastic around the entire hairline and confirm full coverage before entry.
Tight elastic can become uncomfortable during long wear periods.Select soft latex-free elastic with a uniformly gathered edge.
A shallow crown may not accommodate longer or thicker hair.Choose a 530 or 610 mm stretched diameter according to hair volume.
General-purpose nonwoven may not match a high-grade cleanroom garment system.Match packaging and material cleanliness to the controlled-area risk assessment.
Typical Applications
Used for hair containment in controlled support spaces, laboratories, clean packing, food processing, healthcare preparation, visitor gowning and light manufacturing environments.
Technical Parameters
These configurable values describe a disposable spunbond bouffant cap. It is intended for hair containment and does not replace a full cleanroom hood where neck and facial coverage are required.
| Core Material | Lightweight spunbond polypropylene nonwoven |
|---|---|
| Panel Thickness | 0.10–0.18 mm |
| Effective Width | 530–610 mm stretched diameter |
| Maximum Length | 610 mm stretched diameter |
| Steel Facing Thickness | 0 mm; no steel facing used |
| Core Density | 40–70 kg/m³ apparent material bulk density |
| Thermal Conductivity | 0.035–0.055 W/(m·K), material dependent |
| Surface Finish | Soft breathable nonwoven with accordion-gathered crown |
| Joint Type | Circumferential stitched elastic edge with folded crown construction |
| Customization | Available based on the intended application and operating environment. |
Available Options
530 mm or 610 mm stretched diameterWhite, blue, green or other identification colorStandard or heavier spunbond weightLatex-free covered elasticBulk, bagged or cleanroom-compatible packagingSingle or double-stitched elastic band
Planning a Bouffant Cap specification?
Send us your dimensions, installation conditions, performance targets and required surface finish.
