English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
ملابس الغرف النظيفة، PPE والمواد الاستهلاكية
Bouffant كاب
A lightweight disposable bouffant cap with a gathered polypropylene crown and elastic edge for practical hair containment.
- Full hair containment with a gathered crown
- Soft latex-free elastic opening
- Lightweight spunbond polypropylene
مقدمة المنتج
The Bouffant Cap expands into a roomy pleated crown that accommodates different hair volumes while its continuous elastic edge sits around the hairline. Spunbond polypropylene provides a light, breathable disposable layer for controlled support areas, laboratories, food handling and general manufacturing. Compact folding enables efficient dispensing without rigid components.
الخصائص الرئيسية
Continuous elastic edge supports an even fit around the hairline
Lightweight nonwoven construction reduces bulk under additional headwear
Available in common diameters for different hair volume
Color options support zone or visitor identification
مخاوف المنتج للعملاء
A bouffant cap must contain the complete hairline without excessive elastic pressure. Selecting a diameter that is too small can cause slippage, while an oversized cap may sag near the work area.
Hair can escape around the temples or nape.Don the elastic around the entire hairline and confirm full coverage before entry.
Tight elastic can become uncomfortable during long wear periods.Select soft latex-free elastic with a uniformly gathered edge.
A shallow crown may not accommodate longer or thicker hair.Choose a 530 or 610 mm stretched diameter according to hair volume.
General-purpose nonwoven may not match a high-grade cleanroom garment system.Match packaging and material cleanliness to the controlled-area risk assessment.
تطبيقات نموذجية
Used for hair containment in controlled support spaces, laboratories, clean packing, food processing, healthcare preparation, visitor gowning and light manufacturing environments.
المعلمات الفنية
These configurable values describe a disposable spunbond bouffant cap. It is intended for hair containment and does not replace a full cleanroom hood where neck and facial coverage are required.
| المواد الأساسية | Lightweight spunbond polypropylene nonwoven |
|---|---|
| سمك اللوحة | 0.10–0.18 mm |
| العرض الفعال | 530–610 mm stretched diameter |
| الحد الأقصى الطول | 610 mm stretched diameter |
| الصلب يواجه سمك | 0 mm; no steel facing used |
| الكثافة الأساسية | 40–70 kg/m³ apparent material bulk density |
| الموصلية الحرارية | 0.035–0.055 W/(m·K), material dependent |
| إنهاء السطح | Soft breathable nonwoven with accordion-gathered crown |
| نوع المشترك | Circumferential stitched elastic edge with folded crown construction |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
530 mm or 610 mm stretched diameterWhite, blue, green or other identification colorStandard or heavier spunbond weightLatex-free covered elasticBulk, bagged or cleanroom-compatible packagingSingle or double-stitched elastic band
Planning a Bouffant Cap specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
