Three-quarter view of a standard cleanroom fan filter unit with top blower and perforated diffuser

FFU dan Peralatan Penulenan Udara Terminal

Unit Penapis Kipas Standard

A self-contained ceiling module that combines a controllable blower, final filter and perforated diffuser to deliver uniform particle-controlled supply air.

Integrated Blower and Final Filter
Uniform Downward Air Pattern
Modular Ceiling-Grid Format
Top-Side Service Access

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The standard fan filter unit packages a backward-curved centrifugal blower, shallow pressure plenum, mini-pleat final filter and perforated diffuser in one ceiling-mounted housing. Air enters through the top prefilter, is distributed through the plenum and passes evenly across the full filter face before entering the clean zone. The drop-in perimeter is sized for common modular ceiling grids, while separate access to the fan and filter supports routine inspection without dismantling adjacent ceiling panels.

Ciri-ciri Utama

A centered centrifugal blower supplies the pressure needed to overcome the prefilter, final filter and diffuser resistance.

Internal baffles distribute air across the mini-pleat pack instead of concentrating velocity directly below the fan inlet.

The perforated downstream face protects the filter media and moderates the outlet air pattern.

A gasketed ceiling flange limits bypass between the FFU frame and the supporting grid.

Kebimbangan Produk Pelanggan

A standard FFU must provide repeatable clean air over a ceiling bay while remaining straightforward to install, balance and maintain.

A central fan jet creates high velocity in the middle and weak airflow near the filter corners.A formed pressure plenum and internal distribution baffle spread inlet air before it reaches the filter pack.

Air leaks around the module perimeter allow unfiltered ceiling-plenum air to enter the clean zone.A continuous closed-cell gasket seats against the ceiling grid and closes the perimeter bypass path.

Dust loading in a coarse prefilter shortens final-filter service life and raises fan power.A removable top intake prefilter captures larger debris before it reaches the high-efficiency media.

Different ceiling bays require inconsistent on-site adapters and leave uneven module spacing.Standardized square and rectangular footprints fit common cleanroom T-grid layouts with repeatable support points.

Permohonan yang biasa

Pharmaceutical cleanroom ceilingsElectronics assembly clean zonesMedical-device production suitesLaboratory preparation roomsModular hardwall and softwall cleanrooms

Parameter teknikal

Typical construction ranges for a modular standard fan filter unit are listed below.

Bahan Teras	Powder-coated galvanized-steel plenum, backward-curved centrifugal fan and micro-glass HEPA or ULPA filter pack
Ketebalan Panel	300-380 mm overall module depth
Lebar berkesan	575-1170 mm nominal ceiling-grid width
Panjang maksimum	Up to 1170 mm standard module length
Keluli Menghadapi Ketebalan	0.8-1.0 mm formed galvanized-steel housing sheet
Ketumpatan teras	Approximately 80-110 kg/m³ nominal compacted density of the mini-pleat micro-glass filter pack
Kekonduksian Terma	Approximately 0.035-0.045 W/(m·K) for the dry mini-pleat micro-glass pack used in the standard FFU
Kemasan permukaan	White epoxy-polyester powder coating with a white perforated downstream diffuser
Jenis Bersatu	Drop-in T-grid perimeter flange with a continuous ceiling gasket and sealed filter-to-housing interface
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

575 × 575 mm or 575 × 1170 mm footprintH13 or H14 glass-fibre mini-pleat packTop-side fan access with optional clean-side filter releaseManual speed controller or group control interface

Planning a Standard Fan Filter Unit specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami