Bahasa Inggeris
Bahasa Jerman
Bahasa Arab (Bahasa Melayu)
Bahasa Perancis
Bahasa Indonesia: Bahasa Indonesia
Bahasa Jepun
Bahasa Korea (Bahasa Melayu)
Bahasa Melayu (Bahasa Melayu)Semasa
Bahasa Portugis: Bahasa Portugis: Bahasa Portugis
Bahasa Rusia
Bahasa Sepanyol: Bahasa Sepanyol: Bahasa Sepanyol
Bahasa Melayu (Bahasa Melayu)
Bahasa Turki: Bahasa Turki
Bahasa Vietnam (Bahasa Melayu)
Penapis udara dan penapisan kimia
Penapis HEPA Pemisah
A traditional full-depth HEPA cell that uses corrugated aluminum separators to hold broad microglass pleats open under demanding airflow.
- Corrugated Aluminum Separators
- Deep-Pleat Media Pack
- Rigid Full-Depth Cell
- Kapasiti Debu Tinggi
Pengenalan Produk
The separator HEPA filter forms water-resistant microglass media into deep pleats and places corrugated aluminum sheets between adjacent faces. Each separator creates a continuous airflow channel while adding stiffness across the full pack depth. The assembled pack is potted on all four sides into galvanized steel, stainless steel or anodized-aluminum cell sides, then protected by expanded-metal faceguards. Its robust construction is suited to built-up filter banks, containment housings and critical air handlers where the filter must tolerate handling, fan cycling and elevated final resistance.
Ciri-ciri Utama
A deeply potted pack-to-frame bond resists bypass and movement under pressure loading.
Rigid metal cell sides and faceguards protect both media faces during installation and removal.
The full-depth pack offers substantial dust storage for long-duty central HVAC service.
Kebimbangan Produk Pelanggan
Deep-pleat HEPA filters must maintain uniform channels and mechanical integrity as accumulated dust raises the pressure load.
Broad HEPA pleats collapse together and block large sections of media.Corrugated aluminum separators support each pleat face and preserve an open path through the complete depth.
A heavy media pack shifts inside the cell during transport or fan starts.Four-sided polyurethane potting anchors the pack to rigid metal cell sides.
Exposed microglass pleats are punctured during filter-bank servicing.Upstream and downstream expanded-metal faceguards keep hands and rack hardware away from the media.
A distorted full-size filter cannot compress evenly against the bank gasket.Reinforced cell sides and square corner joints retain a flat sealing plane.
Permohonan yang biasa
Critical HVAC final-filter banksPharmaceutical exhaust and supply systemsHospital isolation ventilationContainment and bag-in/bag-out housingsHigh-purity industrial air systems
Parameter teknikal
Typical construction ranges for a full-depth separator HEPA filter are listed below.
| Bahan Teras | Water-resistant microglass HEPA media with corrugated aluminum separators |
|---|---|
| Ketebalan Panel | 150 or 292 mm nominal cell depth |
| Lebar berkesan | 305-610 mm modular face width |
| Panjang maksimum | Up to 762 mm standard face length; larger cells use reinforced framing |
| Keluli Menghadapi Ketebalan | 0.60-1.00 mm galvanized or stainless-steel faceguard and cell components |
| Ketumpatan teras | Approximately 90-160 kg/m³ nominal assembled separator-pack density |
| Kekonduksian Terma | Approximately 0.032-0.039 W/(m·K) for dry deep-pleated borosilicate microglass media |
| Kemasan permukaan | White microglass media with natural aluminum separators and galvanized, stainless or anodized frame |
| Jenis Bersatu | Deep-pleat separator pack fully potted into a rigid gasketed or gel-compatible cell |
| Penyesuaian | Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi. |
Pilihan yang boleh didapati
99.97%, 99.99% or 99.999% at 0.3 µmStandard- or high-capacity media packGalvanized steel, stainless steel or anodized-aluminum cellNeoprene gasket, fluid seal or high-temperature seal
Planning a Separator HEPA Filter specification?
Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.
