Complete magnesium oxysulfate cleanroom panel with coated steel surfaces

Dinding bilik bersih dan sistem siling

Panel Bilik Bersih Magnesium Oxysulfate

A dense inorganic-core cleanroom panel made with magnesium oxysulfate material between coated steel facings, offering a firm wall or ceiling surface for hygienic areas exposed to regular cleaning and controlled humidity.

Dense Inorganic Core
Moisture-Stable Composition
Firm Panel Surface
Tongue-and-Groove Assembly

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The Magnesium Oxysulfate Cleanroom Panel uses a cured, chloride-free magnesium cement core between smooth coated-steel skins. Its dense inorganic structure produces a firm panel with good dimensional stability and resistance to ordinary cleanroom humidity. The outer facings provide the wipeable surface, while formed tongue-and-groove edges align adjacent modules and receive hygienic sealant. Closed perimeter profiles protect the core during transport and prevent cleaning liquid from reaching internal material at the panel ends. The construction is well suited to controlled areas that need a robust mineral panel without exposed fibres or a lightweight polymer-foam center.

Ciri-ciri Utama

Chloride-free magnesium oxysulfate chemistry reduces the corrosion concerns associated with magnesium oxychloride boards.

A dense cured core gives walls a solid feel and resists local compression during normal handling.

Low water absorption helps the core maintain shape during routine humid service.

Smooth coated-steel facings prevent direct exposure of the inorganic core to cleaning agents.

Machined tongue-and-groove edges speed alignment across continuous wall and ceiling runs.

Kebimbangan Produk Pelanggan

Customers commonly compare moisture stability, panel weight, edge durability and surface cleaning performance.

Some magnesium boards absorb moisture and lose dimensional stability.Magnesium oxysulfate chemistry and sealed metal facings limit moisture uptake during normal service.

Dense inorganic panels can be chipped at exposed corners during transport.Protected perimeter profiles and rigid packaging shield vulnerable edges until installation.

Heavy modules are harder to position accurately at full room height.Controlled panel sizes and planned lifting points keep installation safe and joints aligned.

Rough mineral surfaces are unsuitable for frequent cleanroom wiping.Continuous coated-steel skins create the non-porous surface seen by the controlled room.

Permohonan yang biasa

Pharmaceutical preparation roomsFood and beverage clean processing areasMedical-device production spacesLaboratories and hospital support roomsHumid controlled-environment partitions

Parameter teknikal

Typical production specifications for the magnesium oxysulfate panel are shown below.

Bahan Teras	Magnesium oxysulfate inorganic composite
Ketebalan Panel	50, 75, 100 or 120 mm
Lebar berkesan	950 atau 1150 mm
Panjang maksimum	6000 mm
Keluli Menghadapi Ketebalan	0.426–0.80 mm
Ketumpatan teras	Approximately 220 kg/m³
Kekonduksian Terma	Approximately 0.038 W/(m·K)
Kemasan permukaan	PE-, HDP- or PVDF-coated galvanized steel
Jenis Bersatu	Machine-formed tongue-and-groove connection
Penyesuaian	Terdapat berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi

Pilihan yang boleh didapati

Alternative steel coatingStainless steel facingWall or ceiling edge profileCustom module length and cut-outs

Planning a Magnesium Oxysulfate Cleanroom Panel specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami