Three-quarter view of a complete single-person cleanroom air shower

人員 · 材料の汚染除去設備

シングルクリーンルームエアシャワー

A compact, interlocked chamber that removes loose particles from one gowned operator with directional recirculated filtered air before clean-side access.

One-Person Footprint
Directional Garment Jets
Interlocked Door Sequence
Low-Level Particle Return

見積もりリクエスト製品案内

商品紹介

This cleanroom air shower provides a controlled transition between a gowning room and a clean area. After entry, the door sequence holds the passage closed while sidewall nozzles direct filtered air across the operator; released lint is collected through lower return grilles before the air is recirculated. Its compact straight-through layout is intended for single-file personnel traffic where entrance space is limited.

主要な特徴

A narrow internal passage gives one fully gowned operator working clearance without enlarging the entrance footprint.

Adjustable nozzle rows can be aimed at sleeves, torso and lower garments.

Lower return grilles draw released particles downward rather than allowing them to settle on footwear.

A timed controller coordinates the cleaning period and the door-release sequence.

Smooth internal panels allow routine wipe-down of the occupied chamber surfaces.

お客様の製品に関する懸念事項

A single-occupant entry needs repeatable garment cleaning without consuming valuable gowning-room space or creating confusing door operation.

Sleeves and trouser legs receive little cleaning when air is supplied at one height.Multi-level adjustable sidewall nozzles can cover upper and lower garment areas.

Premature clean-side opening can disturb the controlled boundary.The interlock keeps the exit secured until the programmed cycle has ended.

A large entrance unit crowds a compact gowning room.The blower, filtration path and returns are integrated within a slim self-contained enclosure.

Released particles can circulate around the operator.Low-wall return openings collect the particle-laden airflow close to the floor.

典型的な用途

Pharmaceutical gowning entrancesMedical-device assembly roomsElectronics cleanroom transitionsLaboratory controlled-area access

技術的なパラメータ

Typical construction ranges for a compact one-person air shower are listed below.

コア材料	Polyurethane-insulated powder-coated steel enclosure with stainless nozzle plates, prefilter and H13 HEPA recirculation stage
パネルの厚さ	50 mm insulated enclosure panels
有効幅	800-900 mm clear internal passage width
最大長さ	Up to 1200 mm chamber length
鋼鉄の厚さを直面する	1.0-1.2 mm formed steel sheet
コア密度	38-45 kg/m³ closed-cell polyurethane insulation
熱伝導率	0.022-0.028 W/(m·K) for the insulated panel core
表面仕上げ	White epoxy-polyester powder coating with smooth sealed inner surfaces
ジョイントタイプ	Gasketed panel seams with electromagnetically interlocked entrance and exit door frames
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

SUS 304 internal liner12-18 directional nozzlesProgrammable cleaning cycleLeft-hand or right-hand door swing

Planning a Single-Person Cleanroom Air Shower specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する