Three-quarter view of a full-depth separator HEPA filter

エアフィルターと化学ろ過

セパレータ HEPA フィルター

A traditional full-depth HEPA cell that uses corrugated aluminum separators to hold broad microglass pleats open under demanding airflow.

Corrugated Aluminum Separators
Deep—Pleat メディアパック
Rigid Full-Depth Cell
High Dust Capacity

見積もりリクエスト製品案内

商品紹介

The separator HEPA filter forms water-resistant microglass media into deep pleats and places corrugated aluminum sheets between adjacent faces. Each separator creates a continuous airflow channel while adding stiffness across the full pack depth. The assembled pack is potted on all four sides into galvanized steel, stainless steel or anodized-aluminum cell sides, then protected by expanded-metal faceguards. Its robust construction is suited to built-up filter banks, containment housings and critical air handlers where the filter must tolerate handling, fan cycling and elevated final resistance.

主要な特徴

Corrugated aluminum separators maintain full-depth airflow channels between broad microglass pleats.

A deeply potted pack-to-frame bond resists bypass and movement under pressure loading.

Rigid metal cell sides and faceguards protect both media faces during installation and removal.

The full-depth pack offers substantial dust storage for long-duty central HVAC service.

お客様の製品に関する懸念事項

Deep-pleat HEPA filters must maintain uniform channels and mechanical integrity as accumulated dust raises the pressure load.

Broad HEPA pleats collapse together and block large sections of media.Corrugated aluminum separators support each pleat face and preserve an open path through the complete depth.

A heavy media pack shifts inside the cell during transport or fan starts.Four-sided polyurethane potting anchors the pack to rigid metal cell sides.

Exposed microglass pleats are punctured during filter-bank servicing.Upstream and downstream expanded-metal faceguards keep hands and rack hardware away from the media.

A distorted full-size filter cannot compress evenly against the bank gasket.Reinforced cell sides and square corner joints retain a flat sealing plane.

典型的な用途

Critical HVAC final-filter banksPharmaceutical exhaust and supply systems病院の隔離換気Containment and bag-in/bag-out housingsHigh-purity industrial air systems

技術的なパラメータ

Typical construction ranges for a full-depth separator HEPA filter are listed below.

コア材料	Water-resistant microglass HEPA media with corrugated aluminum separators
パネルの厚さ	150 or 292 mm nominal cell depth
有効幅	305-610 mm modular face width
最大長さ	Up to 762 mm standard face length; larger cells use reinforced framing
鋼鉄の厚さを直面する	0.60-1.00 mm galvanized or stainless-steel faceguard and cell components
コア密度	Approximately 90-160 kg/m³ nominal assembled separator-pack density
熱伝導率	Approximately 0.032-0.039 W/(m·K) for dry deep-pleated borosilicate microglass media
表面仕上げ	White microglass media with natural aluminum separators and galvanized, stainless or anodized frame
ジョイントタイプ	Deep-pleat separator pack fully potted into a rigid gasketed or gel-compatible cell
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

99.97%, 99.99% or 99.999% at 0.3 µmStandard- or high-capacity media packGalvanized steel, stainless steel or anodized-aluminum cellNeoprene gasket, fluid seal or high-temperature seal

Planning a Separator HEPA Filter specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する