Three-quarter view of a compact mini-pleat medium-efficiency air filter

エアフィルターと化学ろ過

ミニプレート中効率フィルター

A slim rigid filter that packs closely spaced, hot-melt-stabilized media pleats into a compact frame for efficient fine-particle control.

Compact Mini-Pleat Pack
Hot-Melt Pleat Spacing
Low Resistance
Rigid Edge Sealing

見積もりリクエスト製品案内

商品紹介

The mini-pleat medium-efficiency filter folds fine microglass or synthetic media into closely spaced pleats separated by continuous hot-melt beads. This separator-free geometry creates substantially more active area than a conventional pleated panel without adding frame depth. The pack is bonded around its perimeter into a galvanized, plastic or extruded-aluminum frame, so air is directed through the media rather than around its edges. The compact profile suits staged cleanroom air systems where installation depth is restricted but ePM1 particle capture is required ahead of the final HEPA stage.

主要な特徴

Closely spaced mini-pleats provide a high media-to-face-area ratio within a shallow frame.

Continuous hot-melt beads preserve open airflow channels without corrugated metal separators.

Polyurethane perimeter sealant fixes the pack to the frame and blocks internal bypass.

A rigid upstream face and recessed media protect delicate pleat tips during routine handling.

お客様の製品に関する懸念事項

Mini-pleat filters must fit restricted spaces while keeping every narrow airflow channel open and securely sealed.

A deep conventional filter cannot fit inside a shallow retrofit section.Dense mini-pleat packing delivers the required media area in a 90-150 mm compact depth.

Irregular pleat gaps create localized high velocity and early dust loading.Calibrated hot-melt beads hold repeatable channels from the upstream to downstream edge.

Unprotected pleat tips are damaged while the filter is slid into a tight track.Recessed media and an optional faceguard shield the pack from rack edges and handling contact.

Fine particles bypass where the pack meets the enclosing frame.A continuous polyurethane bond seals all four sides of the mini-pleat pack.

典型的な用途

Cleanroom make-up-air unitsIntermediate filtration before HEPA filtersHospital and laboratory ventilationPharmaceutical support-area HVACCompact air-handler filter banks

技術的なパラメータ

Typical construction ranges for a compact mini-pleat medium-efficiency air filter are shown below.

コア材料	Water-resistant microglass or fine synthetic media with thermoplastic hot-melt separators
パネルの厚さ	90, 100 or 150 mm compact frame depth
有効幅	287 — 610 mm のモジュラー面幅
最大長さ	Up to 610 mm modular face length
鋼鉄の厚さを直面する	0.40-0.60 mm optional galvanized-steel expanded-metal faceguard
コア密度	Approximately 70-120 kg/m³ nominal assembled mini-pleat pack density
熱伝導率	Approximately 0.033-0.042 W/(m·K) for the dry fiber medium
表面仕上げ	White filter media in a galvanized, molded-plastic or anodized-aluminum frame
ジョイントタイプ	Hot-melt-spaced mini-pleat pack continuously sealed into a rigid perimeter frame
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

ISO ePM1 50-80% efficiency range90 mm, 100 mm or 150 mm frame depthMicroglass or fully synthetic mediaHeader flange, box frame or perimeter gasket

Planning a Mini-Pleat Medium-Efficiency Filter specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する