English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
FFU ومعدات تنقية الهواء الطرفية
ULPA مروحة وحدة تصفية
A tightly sealed EC fan filter module configured with U15, U16 or U17 mini-pleat media for processes sensitive to ultrafine airborne particles.
- U15-U17 Filter Options
- Low-Leakage Gel Seal
- Stable EC Airflow
- Room-Side Service Option
مقدمة المنتج
This ULPA fan filter unit combines an aluminium mini-pleat ULPA panel, a rigid powder-coated plenum and a backward-curved EC impeller in one ceiling module. A knife-edge gel seal isolates the downstream face from bypass leakage, while the internal pressure chamber distributes air evenly across the high-resistance filter. Individual 0-10 V control or network-ready regulation helps maintain the selected face velocity as filter resistance changes. It is intended for advanced microelectronics, nanotechnology and precision optical environments where an ordinary HEPA configuration may not provide the required particle-retention margin.
الخصائص الرئيسية
A gel-seal knife edge forms a continuous downstream barrier around the complete filter perimeter.
The EC impeller and pressure chamber maintain uniform discharge without a central high-velocity zone.
Room-side access can keep filter replacement and seal inspection within the controlled space.
مخاوف المنتج للعملاء
Ultrafine-particle control depends on both the ULPA media and the integrity of the complete fan, plenum and filter interface.
A high-efficiency filter can still allow bypass leakage around a compressed perimeter gasket.The knife-edge housing seats continuously in the gel channel to close the perimeter airflow path.
Dense ULPA media raises resistance and can reduce delivered face velocity as the filter loads.An EC fan with adjustable reserve pressure supports stable airflow through the higher-resistance filter pack.
Uneven plenum pressure creates local velocity peaks over sensitive wafers or optical components.Internal baffling spreads the fan discharge before it reaches the full ULPA filter face.
Removing a ceiling module from above can expose an ultraclean room during maintenance.A room-side replaceable arrangement allows the filter and sealing surface to be serviced from below.
تطبيقات نموذجية
Semiconductor wafer fabricationAdvanced display manufacturingالجمعية البصرية الدقيقةNanotechnology research areasCritical mini-environments
المعلمات الفنية
Representative construction ranges for a ceiling-mounted ULPA fan filter unit are listed below.
| المواد الأساسية | Low-boron micro-glass or membrane ULPA mini-pleat pack with aluminium separators and EC centrifugal fan |
|---|---|
| سمك اللوحة | 330-450 mm overall module depth |
| العرض الفعال | 575-1170 mm nominal ceiling-grid width |
| الحد الأقصى الطول | Up to 1170 mm standard module length |
| الصلب يواجه سمك | 0.8-1.2 mm powder-coated steel housing; stainless-steel option available |
| الكثافة الأساسية | Approximately 90-120 kg/m³ compacted density of the ULPA filter pack |
| الموصلية الحرارية | Approximately 0.035-0.043 W/(m·K) for the high-efficiency micro-glass pack used in the ULPA FFU |
| إنهاء السطح | White low-shedding powder coat with anodized aluminium or stainless perforated diffuser |
| نوع المشترك | Knife-edge gel-seal filter interface with closed-cell ceiling perimeter gasket |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
U15, U16 or U17 filter classDry gasket or gel-seal interface0-10 V, Modbus or grouped EC controlTop-side or room-side filter access
Planning a ULPA Fan Filter Unit specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
