Three-quarter view of a white ULPA fan filter unit with blue EC control enclosure

FFU 및 터미널 공기 정화 장비

ULPA 팬 필터 장치

A tightly sealed EC fan filter module configured with U15, U16 or U17 mini-pleat media for processes sensitive to ultrafine airborne particles.

U15-U17 Filter Options
Low-Leakage Gel Seal
Stable EC Airflow
Room-Side Service Option

견적 요청 제품 찾아보기

상품 소개

This ULPA fan filter unit combines an aluminium mini-pleat ULPA panel, a rigid powder-coated plenum and a backward-curved EC impeller in one ceiling module. A knife-edge gel seal isolates the downstream face from bypass leakage, while the internal pressure chamber distributes air evenly across the high-resistance filter. Individual 0-10 V control or network-ready regulation helps maintain the selected face velocity as filter resistance changes. It is intended for advanced microelectronics, nanotechnology and precision optical environments where an ordinary HEPA configuration may not provide the required particle-retention margin.

주요 기능

U15-U17 mini-pleat media provides a higher particulate-retention level than a standard H14 module.

A gel-seal knife edge forms a continuous downstream barrier around the complete filter perimeter.

The EC impeller and pressure chamber maintain uniform discharge without a central high-velocity zone.

Room-side access can keep filter replacement and seal inspection within the controlled space.

고객 제품 관심사

Ultrafine-particle control depends on both the ULPA media and the integrity of the complete fan, plenum and filter interface.

A high-efficiency filter can still allow bypass leakage around a compressed perimeter gasket.The knife-edge housing seats continuously in the gel channel to close the perimeter airflow path.

Dense ULPA media raises resistance and can reduce delivered face velocity as the filter loads.An EC fan with adjustable reserve pressure supports stable airflow through the higher-resistance filter pack.

Uneven plenum pressure creates local velocity peaks over sensitive wafers or optical components.Internal baffling spreads the fan discharge before it reaches the full ULPA filter face.

Removing a ceiling module from above can expose an ultraclean room during maintenance.A room-side replaceable arrangement allows the filter and sealing surface to be serviced from below.

일반적인 응용 프로그램

Semiconductor wafer fabricationAdvanced display manufacturing정밀 광학 조립품Nanotechnology research areasCritical mini-environments

기술 매개변수

Representative construction ranges for a ceiling-mounted ULPA fan filter unit are listed below.

핵심 재료	Low-boron micro-glass or membrane ULPA mini-pleat pack with aluminium separators and EC centrifugal fan
패널 두께	330-450 mm overall module depth
유효 폭	575 - 1170 mm 공칭 천장 그리드 폭
최대 길이	최대 1170 mm 표준 모듈 길이
강철 면면 두께	0.8-1.2 mm powder-coated steel housing; stainless-steel option available
코어 밀도	Approximately 90-120 kg/m³ compacted density of the ULPA filter pack
열전도도 (Thermal Conductivity)	Approximately 0.035-0.043 W/(m·K) for the high-efficiency micro-glass pack used in the ULPA FFU
표면 마무리	White low-shedding powder coat with anodized aluminium or stainless perforated diffuser
접합 유형	Knife-edge gel-seal filter interface with closed-cell ceiling perimeter gasket
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

U15, U16 or U17 filter classDry gasket or gel-seal interface0-10 V, Modbus or grouped EC controlTop-side or room-side filter access

Planning a ULPA Fan Filter Unit specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.