English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أبواب الغرف النظيفة ونوافذ وأنظمة التشابك
نظام ربط الغرفة النظيفة من البابين
A complete interlock package for a two-door personnel or material airlock, allowing only the permitted door to release while the opposite opening remains secured.
- Dedicated Two-Door Logic
- Two Lock and Contact Channels
- Request/Wait Indication
- Emergency Release Input
مقدمة المنتج
The two-door system packages a compact controller with two door-position sensors, two electric-lock interfaces and paired request/status stations. In normal operation, opening one door inhibits release of the opposite door until the first door closes and any selected purge delay expires. The limited door count makes commissioning straightforward and suits common entry vestibules, gowning airlocks and pass-through rooms where the interlock relationship is one-to-one.
الخصائص الرئيسية
Request and wait indicators show occupants when the opposite door is in use.
A resettable delay can hold both doors closed while filtered air restores the vestibule condition.
Emergency release and optional fire-alarm input override normal sequencing according to the selected safety design.
مخاوف المنتج للعملاء
A simple two-door airlock still requires reliable state feedback, clear occupant indication and a defined response to emergency release or power loss.
Both vestibule doors are opened together during busy shift changes.The active door channel inhibits the opposite lock release until closed feedback is restored.
Users repeatedly pull a locked door because they cannot see the airlock status.Paired request stations provide distinct available and wait indications at each entrance.
The second door opens before the airlock has recovered after the first cycle.An adjustable inter-door delay holds release until the selected purge interval has elapsed.
تطبيقات نموذجية
Two-door personnel airlocksGowning-room vestibulesMaterial transfer roomsClean laboratory entrance lobbies
المعلمات الفنية
Typical physical and electrical ranges for a two-door cleanroom interlock kit are listed below.
| المواد الأساسية | Two-channel controller, regulated power supply, relays, door contacts and request/indicator stations |
|---|---|
| سمك اللوحة | 80–130 mm controller enclosure depth; 10–25 mm operator-station depth |
| العرض الفعال | 200–280 mm controller enclosure width |
| الحد الأقصى الطول | 320 mm controller enclosure height |
| الصلب يواجه سمك | 1.0–1.5 mm steel enclosure; stainless operator plates typically 1.2–2.0 mm |
| الكثافة الأساسية | Approximately 1800–1920 kg/m³ for the two-channel glass-reinforced PCB laminate |
| الموصلية الحرارية | Approximately 0.4–0.7 W/(m·K) for the controller PCB laminate |
| إنهاء السطح | Powder-coated controller cabinet with brushed stainless or flush polymer request stations |
| نوع المشترك | Two independent door-contact and lock channels with hardwired request, alarm and emergency-release inputs |
| التخصيص | متاح بناءً على التطبيق المقصود وبيئة التشغيل |
الخيارات المتاحة
Touch, touchless or mechanical request stationsMagnetic locks or electric strikesPurge timer and door-held alarmNormally locked or normally unlocked sequence
Planning a Two-Door Cleanroom Interlock System specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
